Arrma Granite wheel fell off, what parts do I need to fix it?

[Branthoover15010]

I have a Granite 3s BLX (ARA102720T2). When I was taking a turn my wheel fell off and I'm not sure what parts I need. If you can help I'd appreciate it.

 

[Branthoover15010]

The axle bearing and wheel hex is all still connected to the wheel when it fell off.

 

[BobP]

I'd use blue loc-tite on the screw and pull all axles and do the same

 

[tntpoof]

Ok scratching head and wondering why did I waste my time looking at above vid ,its useless!.. thats the diff area. ok do it the simple way take off other side and what parts dont you have on busted side from just looking at pics Id say inside hub searing and outside. Broke wheel axel slide thru and bearing stops it from going all the way thru

 

[TurboChargedHonda]

Hmmm, that seems to be a common issue on the Granite 4x4 V3. I don't think anything broke, just a loose screw. The screws do not have any thread lock from the factory, so they loosen up and back out fairly easily.

 

[BobP]

Ok scratching head and wondering why did I waste my time looking at above vid ,its useless!.. thats the diff area. ok do it the simple way take off other side and what parts dont you have on busted side from just looking at pics Id say inside hub searing and outside. Broke wheel axel slide thru and bearing stops it from going all the way thru

Sure sorry I wasted all your time. I know it's not easy to be the only one that knows anything but I'm sure not going to waste my time on your attitude

 

[Edough13]

@Branthoover15010 looks like everything is there, you just need to re attach the axle stub to the driveshaft with the screw that's at the bottom of the driveshaft tube. You'll need a longer hex driver to reach down the tube to the screw but all you should have to do is use a bit of loctite on that screw and tighten it to the axle stub?