2wd rear A arm on front of 4x4

[Wardo]

If you are having problems finding front A arms for your 4x4use a rear off a 2wd. Cut the cross brace out fo the end closest to the hub carrier so it will clear are the c hub and drill behind it for 4/40 rod put the rod in with 2 nuts and bingo back into buisness. Hope this helps

 

[slowngreen]

Thanks for the tip!

 

[TAC]

Is the hole there for the swaybar, or do you have to drill a swaybar hole?

 

[Wardo]

Is the hole there for the swaybar, or do you have to drill a swaybar hole?

Dont know. Its just a quick fix when u are in a bind. If u have to drill another hole sobe it. Its better than lookin @ it on the work bench wishin u could run it.