What rear driveshaft axles should I use for the rear of my slash?

[Chubaka]

I want mine to do wheelies

Not doing wheelies is a tire, clutch, and or suspension issue not a driveshaft or locker issue. If it's a lcg chassis that can be a factor also.

 

[81exige]

The motor barely heats up, but the esc heats up HIGH TEMP

how high? does it burn your hand if you hold it for some time?

 

[RustyUs]

The motor barely heats up, but the esc heats up HIGH TEMP

The ESC should have a LED blinking if the temp gets too hot.

 

[Mrgoodwrench35]

The factory 3s brushless slash motor is around 3300kv and personally I think thats a bit high but it really depends on the surface you run it on and gearing of course.

Just my opinion but i.dont think the system your running is sustainable for very long.

 

[Slashbuilderseller]

Not doing wheelies is a tire, clutch, and or suspension issue not a driveshaft or locker issue. If it's a lcg chassis that can be a factor also.

You might be right. My slipper clutch might not be clutching the slipper...

 

[Slashbuilderseller]

Should I get a 3665 or 3670 or 3674 motor

 

[81exige]

Should I get a 3665 or 3670 or 3674 motor

what exactly are you trying to achieve? we're not psychic (but we are psychotic) so its not like we'll automagically know what you want to do going with a longer can motor

 

[RustyUs]

Should I get a 3665 or 3670 or 3674 motor

IF they all have the same Kv, and IF they are all the same brand, then I could almost narrow down the choice.
Without knowing anything else about your Slash, a 540/3652 size motor would be plenty... most of the time.
Sorry, I'm of no help.

 

[Slashbuilderseller]

what exactly are you trying to achieve? we're not psychic (but we are psychotic) so its not like we'll automagically know what you want to do going with a longer can motor

I want to know what kV on a longer motor I should use with what esc on 4S or 3S. I am using a longer motor for less bearing wear and less scraping of broken wood noises. I personally dont like short runs that much; I like long runs in dirt and skate park ramps/bowls. I definitely do not want to create a slash nebula, so, I just need to have actual knowledge of what I should use and wht could go wrong.

 

[Mrgoodwrench35]

https://www.amainhobbies.com/hobbyw...00564&gad_source=1&gad_campaignid=22300988787

That

 

[Mrgoodwrench35]

Maybe a little lower kv, but not much.