If you're new to the hobby or just looking for a new bashing RC, then you'll want to check out the new ECX AMP RC's. The ECX AMP line-up come as both a monster truck and desert buggy that feature waterproof electronics, tough composite chassis and oil-filled shocks. Both ECX AMP models come...
I have a Savage XL that I bought used still in the box, Recently I was out playing in sand hills & all of a sudden my Front wheels almost sinned off the wheels, I stopped to check it & my Rear Drive is completely Disabled.
The car starts fine and it runs good and evil operation normally with...
Hello, I bought a new HPI Savage x 4.6 a week ago and after 4 tanks of fuel I tried to start it and found that the turning the input for the nitro start would not turn the crank. I took it apart and found that the starting pin spring was broken. Anyone have this trouble before? Whats the cause...
Hi all.
I'm new here this is my first post so first off thanks in advance.
I have just purchased a savage x second hand 24 hours ago. To say the least it has some issues which I'm proud iv managed to sort myself, clutch was fitted wrong way round so was stalling under any load, grub pin on...
Hey everyone, I decided to make a project thread for the truck. I bought a pre-owned Nitro Stampede and as I quickly learned, there were a few things that weren't disclosed (and I didn't know to look for). No problem, I love a good challenge!
Phase 1 is pretty simple: make it run and run right...
Gosuto
Thread
electric rc
monstertruck
nitro rc
traxxas stampede
So I've got a tmaxx 2.5 with two speed with reverse, while everything sounds good with the engine (it revs up and idles nicely) it won't move the car. I checked the wheels and axles, put new clutch nobs in it, tightened the clutch completely than loosened it 1/4 of a turn, the gear on the...
A buddy of mine had a brush-less motor RC car at work. I was immediately in love when he tore from the gravel lot at like 50 mph over the ditch and across the like foot high grass field and just going faster!! So we saw on Facebook someone selling a used T-Maxx for a good price with accessories...
Okay guys going to be doing a Hpi Blitz build to do some light track time. Considering the VXL or the stock FLux Blitz setup. Which one would you guys recommend? Or is there something eles that would perform better onky running 2s that's all the track will allow.
So I finally blew out the tranny in the old Maxx, I decided to go ahead and upgrade to the extended chassis and stronger transmission. Everything is back together and it runs great, except I have no brakes. Could someone take a few pictures of their max from from the top and bottom. My brake...
I need the front and rear suspension and a transmission. Let me know if you have anything. If you have a box of what used to be a Revo, that might work, too.
Need this, for starters:
Hey guys. I love this thing and I am new. Break lots of things. But mostly because I did something dumb. My main problem is I can't seem to get my pinion to stay in its spot. It keeps spitting itself up the shaft. I have replaced it and it still does it. Anyone know a good trick?
Hey guys just converted my 2.5 to the extended 3.3 chassis using stock parts. Took it out and did some jumping last night and it was going good until the screws holding the rear bulk head started coming loose, and the screws ripped through the skid plate. Just wondering what you guys recommend...
Can't believe I am asking this but I am considering converting one of my Tmaxx rigs to an emaxx. So figured I would get some opinions on a good conversion?
Hi guys,
I just picked up a used Savage off Craigslist yesterday. It's in rough shape, and I'm looking to make it shine once again. And I'm a born again newb. This is my first nitro. Can you tell me what I got, or how old it might be? The body says Savage 25, but I'm not sure if they are...
I've only posted in this forum one other time, but it was very helpful to me, so I'm gonna try again.
I crashed my 3.3 Revo the other day, and since I was left replacing a pushrod, I thought I'd do the A-Arms too (which would give me a set for parts anyway). Well I removed the broken pushrod...