Traxxas Slayer Pro 4×4 rejoice! RPM has developed a set of front A-arms for the popular short course truck. The Slayer Pro A-Arms from RPM is not only designed to endure the toughest of conditions they have also been designed with no low hanging cross braces or shock mounting areas providing better ground clearance along…
The new RPM offset-compensating front a-arms for the Traxxas Slash and Traxxas Nitro Slash not only add about 3mm width to each side of the truck and adds a bit of stability, but the new RPM offset compensating a-arms also allow you to easily mount your favorite tires on rear offset Traxxas or RPM wheels…
RPM RC Products continues to bless ECX owners with upgrades. RPM’s latest Heavy Duty Caster Blocks are designed to fit the ECX Torment, Ruckus, Circuit and Boost 2-wheel drive vehicles. RPM has redesigned the overall geometry of the caster block and increased thickness by up to 20% in key breakage areas. Made in the USA!
RPM has just released an oversized rear axle carrier for the ECX Boost, Ruckus, Boost, and Torment 2WD RC’s. The new oversized ECX rear axle carrier has been designed to use 5x11mm bearings and while the 1mm may not sound like a big difference, it in fact nearly doubles the load and fatigue ratings over…
Just last month RPM released their Front A-arm set for the ECX Torment, Ruckus, and Circuit. This month they follow it up with a set of REAR A-arms! The Rear RPM ECX a-arms feature leading and trailing edges making the a-arms more aerodynamic and also allow the ECX rear a-arms to transition up and over…
RPM customers have been telling them for a long while now that the stock extended a-arms for the Traxxas Summit / Revo was not holding up. RPM held out on the a-arms thinking Traxxas would design a new chassis due to the weird geometry found on the trucks… Traxxas didn’t and now RPM has released…
RPM has good news for Traxxas Summit owners with the release of their new front a-arms! Well actually front left a-arm as the Traxxas Revo front right a-arms (part #: 80212 & 80215) also fit the Traxxas Summit right front. The current RPM Revo left arms would not fit due to the extended T-Lock differential…
RPM has a new front shock tower for your Associated SC10B, SC10.2, and T4.2FT that’s been designed with one goal in mind, survivability! The new shock tower increased and improved support in all the vital areas of the stock shock tower and of course made from RPM’s indestructible plastic. Made in the USA and covered…
Proline’s latest generation of short course truck shock technology has arrived, the Proline Pro Spec shocks! Proline has paid close attention to every detail and refined the shocks to give the best performing and best looking Shocks ever made. The Pro-Spec Shocks are a 12mm Big Bore design with a Single Low Friction X-Ring Seal….
RPM front A-arms for the Associated ProLite 4×4 and Thunder Tiger Sparrowhawk/Tomahawk RC vehicles were designed to add some needed strength and durability to these RC’s. The ProLite RPM A-arms are manufactured using RPM’s trademark blend of extremely tough nylons allowing our A-arms the ability to easily shrug off crashes that would break stock parts.
RC4WD has announced a set of officially licensed Rock Krawler extended length aluminum links for the Axial Wraith. The RC4WD Rock Krawler extended length links feature true to scale looks with their laser etched logo on and smooth anodized coating.
RPM has added to their already long list of durable parts for the Traxxas Slash 4×4 and Traxxas Stampede 4×4 trucks with their new Caster and Spindle blocks. RPM used a lower-case “H” structure for their core design when designing the caster blocks which provides extreme rigidity to keep camber and caster setting locked in…