RPM Front A-Arms for Arrma Outcast, Kraton and Talion

March 21, 2017July 30, 2021 RPM RC Products

rpm arrma a-arms 81482

RPM is going to make a lot of Arrma RC fans happy with their most recent release of Arrma front upper and lower a-arms that fit the Arrma-RC Kraton, Talion and Outcast!

The new A-Arms not only eliminate slop found in the stock a-arms, but the RPM arms are also 10% lighter while also adding a second shock mount option and of course made from RPM’s popular nylon blend.

Part #: 81482 – RPM RC Products Front Upper and Lower A-Arms for the Arrma Outcast, Kraton, and Talion.
MSRP: $12.95 /pair

Get more Arrma news in our sister site, Arrma Forum.

Facebook Twitter Pinterest

ECX Torment, Ruckus and Circuit Front A-arms

April 8, 2014July 30, 2021 RPM RC Products

FacebookTwitterPinterest The ECX Torment, Ruckus, and Circuit RC’s continue to increase in popularity and are now receiving some love from RPM Products with a set of black front A-Arms. The RPM front a-arms for the ECX not only more aesthetically pleasing than stock. The angled leading and trailing edges are more aerodynamic and allow the…

Savage X center skid plate from RPM

August 10, 2006July 30, 2021 RPM RC Products

FacebookTwitterPinterest RPM has just released a center skid plate for the HPI Savage X. RPM realized protection is key to winning the battle against the elements. Stock HPI Savage / HPI Savage X trucks have a bare under chassis completely exposed to the most devastating of elements such as – rocks, asphalt, concrete, etc. RPM…

Axial EXO Machined Aluminum Hop-ups

May 31, 2012July 30, 2021 Axial

FacebookTwitterPinterestAxial EXO have lots of new goodies to look forward to as Axial has just released a number of aluminum upgrades for the Axial EXO! Axial EXO Aluminum Front Shock Tower Add some strength to the Axial EXO chassis while retaining the ability to tune the suspension geometry with many combinations. if performance and durability…

Hot Racing Graphite Rear Lower Arm for Axial Yeti

January 26, 2015July 30, 2021 RC Article

FacebookTwitterPinterest If you’re looking for a different look for your Axial Yeti, then check out the new graphite rear lower arms from Hot Racing. Made from anodized blue CNC 6061 aluminum with light weight graphite braces. FacebookTwitterPinterest

Oversized ECX Rear Axle Carrier from RPM

August 13, 2014July 30, 2021 RPM RC Products

FacebookTwitterPinterest RPM has just released an oversized rear axle carrier for the ECX Boost, Ruckus, Boost, and Torment 2WD RC’s. The new oversized ECX rear axle carrier has been designed to use 5x11mm bearings and while the 1mm may not sound like a big difference, it in fact nearly doubles the load and fatigue ratings…

RPM rear skid plate for Baja 5B & 5T

August 6, 2010July 30, 2021 RPM RC Products

FacebookTwitterPinterest RPM has released a new rear skid plate for the HPI Baja 5B and 5T. The new RPM Baja rear skid plate has been designed to protect large rear-mounted aftermarket exhaust pipes that the two small stock tubes leave virtually exposed to everything. FacebookTwitterPinterest

Similar Posts