Attention to all the ARRMA 4s Kraton and Outcast owners, RPM has just released FRONT & REAR A-Arms for you! The new RPM Arrma 4s A-Arms are designed to not only increase strength and durability but also improves on the stock Arrma 4s A-Arms by removing the slop found in the stock arms. As well…
RPM has just announced Rear A-arms for the Arrma Typhon 4×4 3s BLX buggy. Coupled with their recently released Front A-arms your Arrma Typhon 3s BLX will be nearly bulletproof.
Good news coming from RPM RC Products for owners of the Arrma Typhon 3s BLX with the release of the new RPM front A-arms. The RPM Front A-arms are not only lighter than stock but are more durable and offers more adjustability with the added second shock mount location.
For those with the 1/10 Arrma 3s 4×4 truck, RPM has big news! They are now offering a set of suspension arms that are made for the Granite 4×4, Senton 4×4, and Big Rock CC 4×4.
Tekno EB410 owners now have a few more ways to tweak the setup of their EB410 buggy. Tekno has just released a front and rear sway bar sets. The front sways bars allow owners to tune steering sensitivity and prevent traction rolling on high grip surfaces. While the rear Tekno EB410 sway bar set includes…
RPM again has a new set of A-Arms available for the Arrma Kraton, Outcast and Talion – this time Rear A-Arms! The RPM Rear A-Arms have been designed to reduce slop and be more durable than the stock A-Arms. Made from RPM’s famous nylon blend and protected by their lifetime warranty!
RPM is going to make a lot of Arrma RC fans happy with their most recent release of Arrma front upper and lower a-arms that fit the Arrma-RC Kraton, Talion and Outcast! The new A-Arms not only eliminate slop found in the stock a-arms, but the RPM arms are also 10% lighter while also adding…
Proline’s latest shocks, Ultra Reservoir Crawler Shocks are with scale realism for 1/10th scale RC Rock Racers and RC Crawlers. The Proline Ultra Reservoir Shocks perform just as good as they look with their fully functioning reservoir shock system with adjustable dual rate dual spring design with blue anodized aluminum caps.
RPM has something for all the Helion Invictus MT owners out there that’s sure to make them a bit more happier with the release of front A-arms for their monster truck. The RPM a-arms for the Helion Invictus MT have been built with tighter tolerances, over-sized bosses around the hinge pins and pivot balls for…
New from RPM RC is Axial Yeti XL Front Shock Tower. The new front shock tower is stronger than the stock front shock tower and also added additional support to the camber link ears and upper shock mounts. As like other RPM RC products, the Axial Yeti XL front shock tower is made from their…
If you’re racing 1/10th scale buggies then you’re going to want some of the best shocks available and Proline is now releasing the next generation of Pro-Line Shock Technology with the Proline Pro-Spec shocks. The Pro-spec shocks from Proline Racing feature a 12mm big bore design and a single low friction x-ring seal. Proline has…
If you’re looking for a different look for your Axial Yeti, then check out the new graphite rear lower arms from Hot Racing. Made from anodized blue CNC 6061 aluminum with light weight graphite braces.