Whatcha Printing?

[HPIguy]

Mine don't run very often anymore, but the other day I bought a bunch of ground beef that was on sale, and I decided to make hamburger patties out of some of it. I like making big patties, so I 3d printed a ring mold 120mm x 20mm deep. It works pretty darned good I must say. That's one of the benefits of having a 3d printer. When you have a need for something simple, you csn just print it.

That is a pretty cool looking case!

Oh, I have two of those bucket seats too

I'm sure I'll eventually get to that point as well. I've just wanted a printer for a LONG time, so I have a lot of stuff backlogged to print.

I generally do smashburgers on the Blackstone, but a mold could be handy also.

One of these days I'm gonna dive into Fusion, and I'll take you up on your offer of help. Because I'll likely be really lost. LOL

 

[WickedFog]

I'm sure I'll eventually get to that point as well. I've just wanted a printer for a LONG time, so I have a lot of stuff backlogged to print.

I generally do smashburgers on the Blackstone, but a mold could be handy also.

One of these days I'm gonna dive into Fusion, and I'll take you up on your offer of help. Because I'll likely be really lost. LOL

I generally do smash burgers in a cast iron skillet. But I bought so much burger this time I needed to freeze a lot of it, and patties take up less room in the freezer. I have already thawed a couple and made burgers out of them But they were the perfect size after cooking

 

[majin]

wife asked me to print her one of the screw bins for her jewelry stuff, and the only color we have on hand is black and pink ( for her skaddis board stuff)
the time lapse is pretty cool, but i have to waste filament to do it as it makes a prime tower when i do the timelapse and doesn't when i dont, so probly wont be making many videos unlesss the item is large.

 

[RetroThutmose]

Finally got my big @## bumper printed

Front is holding up like a champ.

 

[RetroThutmose]

Made some adapters for my setup station. Only.comes with 8th scale hardware so I made my own!

 

[majin]

@WickedFog can you help me save some money AND make one i can use?
https://www.ebay.ca/itm/166788871925
id like a little stand for the diff housing
i can't get measurements yet tho because parts are in the mail but knowing you I'm positive you have one or similar on hand lol
i was hoping you could design a universal model for me????
https://www.amazon.com/dp/B09QCXQTJD?ref=ppx_yo2ov_dt_b_fed_asin_title
this is the diff ill be messing with if that helps?

 

[RetroThutmose]

@Doom! can you help me save some money AND make one i can use?
https://www.ebay.ca/itm/166788871925
id like a little stand for the diff housing
i can't get measurements yet tho because parts are in the mail but knowing you I'm positive you have one or similar on hand lol
i was hoping you could design a universal model for me????
https://www.amazon.com/dp/B09QCXQTJD?ref=ppx_yo2ov_dt_b_fed_asin_title
this is the diff ill be messing with if that helps?

$32 for a wedge of pla with some holes in it?!?!?!

 

[Doom!]

@Doom! can you help me save some money AND make one i can use?
https://www.ebay.ca/itm/166788871925
id like a little stand for the diff housing
i can't get measurements yet tho because parts are in the mail but knowing you I'm positive you have one or similar on hand lol
i was hoping you could design a universal model for me????
https://www.amazon.com/dp/B09QCXQTJD?ref=ppx_yo2ov_dt_b_fed_asin_title
this is the diff ill be messing with if that helps?

I think you meant to page @WickedFog, he is the 3d Wizard.

 

[majin]

I think you meant to page @WickedFog, he is the 3d Wizard.

I did indeed lol
Fixed it thanks bro

 

[WickedFog]

@WickedFog can you help me save some money AND make one i can use?
https://www.ebay.ca/itm/166788871925
id like a little stand for the diff housing
i can't get measurements yet tho because parts are in the mail but knowing you I'm positive you have one or similar on hand lol
i was hoping you could design a universal model for me????
https://www.amazon.com/dp/B09QCXQTJD?ref=ppx_yo2ov_dt_b_fed_asin_title
this is the diff ill be messing with if that helps?

I don't have one of those out of the RC. I have 9ne in our 6S Kraton. I will see if I can measure it.

 

[majin]

I don't have one of those out of the RC. I have 9ne in our 6S Kraton. I will see if I can measure it.

i got miner in th email today, what do i need to measure?

 

[RetroThutmose]

i got miner in th email today, what do i need to measure?

Cup diameter and length from the housing

 

[majin]

cup diameter 12.6
length to bearing before the housing is 21.5mm

 

[RetroThutmose]

cup diameter 12.6
length to bearing before the housing is 21.5mm

View attachment 232562

View attachment 232563

Measure the flat side so you can key it in and check diff action by hand.

 

[WickedFog]

cup diameter 12.6
length to bearing before the housing is 21.5mm

View attachment 232562

View attachment 232563

You're not measuring that right. Do not meaure across the slots. It will be smaller. And don't measure so deep in the jaws. That is not a measuring surface.

Do not measure with this area of the jaws.

 

[majin]

You're not measuring that right. Do not meaure across the slots. It will be smaller. And don't measure so deep in the jaws. That is not a measuring surface.

Do not measure with this area of the jaws.
View attachment 232565

they are measured correctly, it is just laid like that so i could take a picture
it is measured using the correct part of the caliper. the pic just makes it look sloppy thats all.

i added 3 mm so it would have a little wiggle room so i dont go and get things stuck

 

[majin]

lol this turned into a caliper lesson over a bad picture

 

[majin]

Measure the flat side so you can key it in and check diff action by hand.

flat side is 10mm

 

[Chubaka]

lol this turned into a caliper lesson over a bad picture

Hold on. Recalibrating.

 

[RetroThutmose]

Hold on. Recalibrating.

enhance!