what to buy!?

[charby]

so i just got 100 bucks to spend on the revo, what should i buy? i hate when i have some spending money and i just can't decide what to get , help me out guys spend my moneyy , i want my revo to wheelie, is there anything i can get to help that out?

how much does a picco .26 go for ?

 

[alien13]

The picco .26 MAXX is priced at $189 at NitroHouse, and that's the cheapest of the picco .26 models.

 

[Tombomb]

If ya have a hundred bucks and don't know what to buy, don't buy anything. Then, later, you might know what to buy when you eventually have two hundred bucks.

 

[hamz9561]

Another thing to look at is RPM arms and bumpers. Maybe also a True Track set-up.

 

[Metalhead Matt]

What engine is on your Revo now? If it's a 3.3 and won't wheelie, it's not tuned very well. Or the slipper is loose. Remember, that when a .26 Picco is dropped in, plenty of drivetrain parts will drop out.

 

[charby]

I'm a newb, where is the slipper? yea it has the 3.3

 

[Metalhead Matt]

The slipper is attached to the spur gear. Adjust it in small increments. The nut in the middle of the spur gear is what you adjust it with. About an 1/8th of a turn at a time. Do you have the manual to your rig? If so, read it and familiarize with all the workings of the vehicle. If you don't have it, you can download it from Traxxas.com.

 

[charby]

orderd a ths exhaust and the venom failsafe/ temp monitor

 

[Metalhead Matt]

You'll need a regular, hand held temp gun to calibrate the temp monitor on the failsafe. Unless you have tuning figured out, messing with the pipe won't yield very good results. Your Revo should wheelie bone stock unless it has a center diff and rear brake kit.

 

[moe7404]

i would stock up on parts that break a lot, or nitro