What is your least favorite hardware to work with in RC, and what do you wish would be used instead? Mine is Philips head screws, and I wish they would use either Torx or square. Square are even better than Torx, and nigh impossible to strip.
-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
What is your least favorite hardware to work with?
- Thread starter Cranberry Juice
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
- Messages
- 13,181
- Reaction score
- 25,107
- Points
- 1,950
- Location
- Bomb Pop Island
- RC Driving Style
- Bashing
- Racing
Sae hex. Bc I have mostly metric tools and sae seems to strip even more easily for me it seems. To be fair the only experience I had with sae hex is on a old XXT I was taking apart for a rebuild and the screw heads were quite rusty and havent moved in well over 25 years lol.
If talking just in general not rc, id say flat head. Sucks more if I use a flat head bit with my electric driver. Most of the time it slips.
If talking just in general not rc, id say flat head. Sucks more if I use a flat head bit with my electric driver. Most of the time it slips.
- Thread starter
- #3
If it should move and it doesn't, WD 40!
- Messages
- 13,181
- Reaction score
- 25,107
- Points
- 1,950
- Location
- Bomb Pop Island
- RC Driving Style
- Bashing
- Racing
Very true lolIf it should move and it doesn't, WD 40!
Button head screws. They're designed from the ground up to strip. I'm with you that square or torx heads would be better.
Suburban_Hooligan
Hardcore RCTalk User
Rig of the Month Winner
Build Thread Contributor
RC Showcase: 22
JIS screws. cause a Philips screwdriver will strip them. and who the hell has JIS screwdrivers?
- Messages
- 13,181
- Reaction score
- 25,107
- Points
- 1,950
- Location
- Bomb Pop Island
- RC Driving Style
- Bashing
- Racing
Not me, not you, but Tamiya does.
- Thread starter
- #8
I do! My iFixit kit came with them!
RetroThutmose
RCTalk Addict
- Messages
- 693
- Reaction score
- 1,327
- Points
- 153
Reading glasses, can never find them
Xraycer
💀 💀 💀 💀
Lifetime Supporter!
Supporter
Excellence Award
Hospitality Award
Build Thread Contributor
RC Showcase: 1
- Messages
- 14,986
- Reaction score
- 41,006
- Points
- 1,870
- Location
- NH
- RC Driving Style
- Bashing
- Racing
- Crawling
- Flying
- Boating
It's right on top of your head.
- Messages
- 363
- Reaction score
- 932
- Points
- 238
- Location
- UK, wettest place on earth
- RC Driving Style
- Bashing
- Crawling
I do..!!
Get the correct tool for the correct job and 99.9% of the time you won't have any issues, most of the time I see people complaining about this hardware and that hardware it's usually user error that causes the problem..!!
My personal favourite is people stripping various hex heads to then show you pics of the heads full of dirt or soil and they wonder why the tool tip strips the bolt..
Oh, and on a side note any and all slot heads should burn in hell..!!
