• Welcome to RCTalk! šŸš€

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

Traxxas corvette stingray is getting some upgrades!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

RetroKevin

Bashing is a way of life!
Build Thread Contributor
Messages
225
Reaction score
323
Points
710
Location
Duluth MN
RC Driving Style
  1. Bashing
  2. Racing
  3. Crawling
20210815_212113.webp
20210815_212139.webp

I've already replaced the stock receiver with a spectrum sr315 so I could bind it to my dx5c.
20210815_212153.webp

I'm going to be taking out the titan 12t 550 motor for a traxxas Velineon.
20210815_212213.webp

The xl5 esc will be replaced with a vxl-3s.
20210815_212224.webp


But enough babble, I'm going to get to wrenching! šŸ¤˜šŸ¼
Stock stuff out. Ready for MORE POWER!
20210815_221312.webp

Motor is in.
20210815_222709.webp

Time to take care of that traxxas connector.
20210815_222718.webp

I don't have any batteries with this so I'll swap it with something I do. Goodbye traxxas warranty! šŸ˜…šŸ˜‚šŸ¤£
 
Last edited:
It looks great. And I guess it's a whole new setup by traxxas. I was unimpressed by the power and stock electronics. Top speed was 26mph, and the range of the radio was 30ish ft. I'll have a video of the stock setup coming out soon.

Took it out today with the sr315 receiver and range was a great improvement as I expected. I also had those drift tires on there which was a lot of fun. Poor brushed motor just got too hot too quick. So I knew I had to do the upgrades tonight šŸ˜†
20210815_234213.webp

EC5 connector added, ready for my 3s batteries and to be installed... almost done! 😁
20210815_234544.webp

Little piece needs to be cut to fit in the sr315.
 
Last edited:
20210815_235030.jpg

20210815_235049.jpg

Esc mount screws won't tighten down. Gonna mount it the old fashioned way with some double sided tape.
20210815_235357.jpg

I'll clean everything up with denatured alcohol so the tape has a good stick (it's even traxxas colors šŸ˜†).
20210815_235531.jpg

All cleaned up.
20210816_000512.jpg

All set! Time to toss a battery in and make sure everything is bound and works!
20210816_001106.jpg

Might have to stick to 2s until I can mod the battery mount... šŸ˜’
20210816_001949.jpg

Stingray 3s is all setup! Quick little rip in the shop and this thing has POWER!
 
Last edited:
Back
Top