Transmitter Case

[RBRC]

Looking for recommendations on a transmitter case. I'm currently using the Spektrum iXSR, I don't think the case it came with will last and I would like something that will provide more protection. I'm currently looking at the ProTek cases but wanted to check with the community before I make any purchases.

 

[332_RC]

@CJSRCLIFE

 

[CJSRCLIFE]

Looking for recommendations on a transmitter case. I'm currently using the Spektrum iXSR, I don't think the case it came with will last and I would like something that will provide more protection. I'm currently looking at the ProTek cases but wanted to check with the community before I make any purchases.

You could do the Pro-Tek one and get the pick and pluck variant for the foam or you could get this one right here. The case intended for the DX6R and Spektrum transmitters with a similar design. https://www.amainhobbies.com/spektrum-rc-dx6r-transmitter-case-spm6719/p531186 I looked at it too for mine after get my new model iXSR but i'll give the original case packaging a chance first.

 

[RBRC]

You could do the Pro-Tek one and get the pick and pluck variant for the foam or you could get this one right here. The case intended for the DX6R and Spektrum transmitters with a similar design. https://www.amainhobbies.com/spektrum-rc-dx6r-transmitter-case-spm6719/p531186 I looked at it too for mine after get my new model iXSR but i'll give the original case packaging a chance first.

I'm leaning towards the pick & pluck unit due to the fact I can customize it for other things I want in the case. The original one is ok, I'm just worried about it over the long term.

 

[CJSRCLIFE]

I'm leaning towards the pick & pluck unit due to the fact I can customize it for other things I want in the case. The original one is ok, I'm just worried about it over the long term.

Sounds like you got a plan if i could i would get a big Spektrum case and make something like this for it if i had a large 3d printer.

 

[RBRC]

Sounds like you got a plan if i could i would get a big Spektrum case and make something like this for it if i had a large 3d printer.

Ah man that is awesome!! Wonder If I can find somebody to make something similar ??? This gives me some ideas now!

 

[CJSRCLIFE]

Ah man that is awesome!! Wonder If I can find somebody to make something similar ??? This gives me some ideas now!

First i got to get my radio and then a case for it, And maybe find someone who would be kind enough to lend their 3d printer to print a beast of an insert like what Raz has. he mostly configured his to fit a Futaba 7PX (The original one not the R version) it also fits with the range booster\amplifier on his radio i had an idea to maybe put a range booster\amplifier on my soon to be new iXSR or my DX6C.

 

[aklindeman]

I found a pick and pull foam generic case on Amazon for about $30. Plus it came in all sorts of colors!

 

[aklindeman]

 

[aklindeman]

 

[RBRC]

View attachment 244873

To Amazon I go!!!!!!

 

[Jerold]

Harbor Freight has hard cases in different sizes

It comes with pluck foam, which is easy but not that durable. You can buy case foam on Amazon and cut it with a box knife. I would use multiple layers. It's cheaper, easier to work with and gets better results.

https://a.co/d/9UZgYpu

This is my camera gear case.
https://www.arrmaforum.com/threads/case-for-the-camera-gear.58838/