Hello All,
Maybe you can offer me some guidance for overcoming the challenge described below.
I am modifying my Traxxas UDR to be run on Mamba XLX2. Changes will include also full aluminium milled custom frame (3d printed now, needs several changes, model shown below) and gearbox (early days of development).
Now I am looking for a solution for transmission from motor to spur gear.
As motor shaft is 8mm, and torque will cause apparently some issues for 0.8 mod gears, ideally, I’d need 1.0 or 1.5 mod spur gear to replace original 8574. Plus, gear for motor and also a third gear between these two.
Equally, I can run it all in with 6S first and find pinion gear with mod 0.8, for 8mm shaft and ca 27 teeth. Plus, a gear between that one and standard 8574, which is easy-beasy part of the equation.
The challenge is, as you can imagine, finding suitable gears for either approaches described above.
Maybe, as an option, a whole central differential could be replaced but I am not familiar with other manufacturer solutions there…
Is there anything you can suggest me please to start with?
Warm regards,
Lauri
Maybe you can offer me some guidance for overcoming the challenge described below.
I am modifying my Traxxas UDR to be run on Mamba XLX2. Changes will include also full aluminium milled custom frame (3d printed now, needs several changes, model shown below) and gearbox (early days of development).
Now I am looking for a solution for transmission from motor to spur gear.
As motor shaft is 8mm, and torque will cause apparently some issues for 0.8 mod gears, ideally, I’d need 1.0 or 1.5 mod spur gear to replace original 8574. Plus, gear for motor and also a third gear between these two.
Equally, I can run it all in with 6S first and find pinion gear with mod 0.8, for 8mm shaft and ca 27 teeth. Plus, a gear between that one and standard 8574, which is easy-beasy part of the equation.
The challenge is, as you can imagine, finding suitable gears for either approaches described above.
Maybe, as an option, a whole central differential could be replaced but I am not familiar with other manufacturer solutions there…
Is there anything you can suggest me please to start with?
Warm regards,
Lauri