Today with the slash and rustler

[DavidB1126]

Slash: Since the motor is done, I took the motor from my rustler and put it in the slash. They both have the same motor. Me and my dad went to our storage unit place and decided to bring the slash with the rustler motor in it. Just drifted around. Had the stock rustler tires on the slash since they are wider and because they are wider I flip over a lot less. Also the rustler motor had more kick to it, more torque because the rustler motor is a lot newer than the old slash motor.

Rustler: Didn't run it today because I took the motor out and put it in the slash. Steering turnbuckles should be here on Tuesday.

Next for Slash:
Motor ( replacing with titan 12t)
Traxxas Aluminum Steering Bellcrank
LCG Chassis
Tires

Next for Rustler:
RPM Front Bulkhead (didnt break stock one yet put want to replace it)
RPM Front and Rear Arms (didnt break stock one yet put want to replace it)

Took 2 vids today had to post them on my other account cause I couldn't log into my main channel
Secondary YT channel
Main YT channel

 

[Doom!]

I think there should be polished concrete everywhere to play on!

 

[Greywolf74]

Just out of curiousity, why put another Titan 12T in it when you could get something like this Reedy brushed motor for about $5 more? Its a lot better quality. I know its a 17T instead of a 12T but the Titan 12T afaik is around a 3000-3100kv motor and the Reedy is a 3600kv motor. Should be a lil faster and better made.

https://www.towerhobbies.com/produc...CwQC4iXm_DN5kFzOOn4PMM1h553kXiAwaAsdYEALw_wcB

 

[WickedFog]

Slash: Since the motor is done, I took the motor from my rustler and put it in the slash. They both have the same motor. Me and my dad went to our storage unit place and decided to bring the slash with the rustler motor in it. Just drifted around. Had the stock rustler tires on the slash since they are wider and because they are wider I flip over a lot less. Also the rustler motor had more kick to it, more torque because the rustler motor is a lot newer than the old slash motor.

Rustler: Didn't run it today because I took the motor out and put it in the slash. Steering turnbuckles should be here on Tuesday.

Next for Slash:
Motor ( replacing with titan 12t)
Traxxas Aluminum Steering Bellcrank
LCG Chassis
Tires

Next for Rustler:
RPM Front Bulkhead (didnt break stock one yet put want to replace it)
RPM Front and Rear Arms (didnt break stock one yet put want to replace it)

Took 2 vids today had to post them on my other account cause I couldn't log into my main channel
Secondary YT channel
Main YT channel

Man, if you could get a couple doors opened on each side of that you could get some Ken Block obstacles setup

 

[Greywolf74]

Man, if you could get a couple doors opened on each side of that you could get some Ken Block obstacles setup

I need to build a drift car

 

[Tunedfrog]

Hmm cool in the summer, warm and dry in the winter. Awesome place to bash..

 

[STONER RC]

Nice spot to drift in. Good throttle control bud .. that's a tight hall. I would have been like a ping pong ball off the doors/walls.