The Picco .26 Max Red Dot and shimming...

[Streaker]

Thanks for the more detailed info.

If I'm just a back yard banger, I don't need to run a higher % nitro? I just play around with a few friends and would be more satisfied with getting more use out of my motor than power. 20% would be the better choice for me??

 

[showjyr]

I'm running the same engine 30% with factory shim. No racing just bashing...creaping up on a gallon through the mill and it just keeps getting better. Tons of power from a dead stop all the way to top end and it'll sit and idle forever.

I'd run it but that's up to you.

 

[2revo1maxx]

All you have to do is keep it tuned properly, there's nothing to lose by running 30%. I mix 20% and 30% to create 25% and run it in all my engines big and small.

 

[showjyr]

Also be sure to check the specs on fuel and engine for lube %...I believe Picco recommends 9 or 10%. I run Byron originals Gen 2 race 3000...30% nitro and 11% lube, the prodriver 30% from them isn't high enough lube content.

 

[Streaker]

I've ran a few tanks through my Red Dot so far and I frickin love it. I want to build my Revo into a solid truck, so I have a lot of upgrades to find n buy. Thing is already burning a hole in my pocket again and I've only bought the motor so far