Spektrum on/off switch

[Fboylstein]

I have a Losi 22s and just had the orange on and off botton pop out of switch. Luckily I found it. Any problem putting it right back in??
Thanks

 

[Fboylstein]

Just fixed it. Of course popped right back in. Will have to keep an eye on them

 

[Xraycer]

Glad we could help!

 

[Tunedfrog]

I worked long and hard to find the fix for this one, great job...

 

[Chubaka]

Maybe put it in a small bag or balloon and zip tie it. When it happens again, it will be contained.

 

[Fboylstein]

Good idea

 

[The_RC_Dude]

I have a Losi 22s and just had the orange on and off botton pop out of switch. Luckily I found it. Any problem putting it right back in??
Thanks

You're welcome, this one was a tough problem, we all conferred for several days, trying to best advise you on what procedure to take!

Just fixed it. Of course popped right back in. Will have to keep an eye on them

How about a small drop of super glue around the switch housing (or wherever it popped out)? Spread the glue around the housing with a tooth pick or Q-tip with the head cut off (so you won't get bits of Q-tip head fluff in the glue)!

 

[Fboylstein]

Sounds good, thanks!

 

[ahr43]

Glad you got 'er fixed. Maybe there is a better quality I/O out there that will work in its stead?

Use CA glue sparingly around electronics. They don't play well together. Or at least they didn't fourteen years ago when running a Novak. Cheers. 'AC'

 

[The_RC_Dude]

Glad you got 'er fixed. Maybe there is a better quality I/O out there that will work in its stead?

Use CA glue sparingly around electronics. They don't play well together. Or at least they didn't fourteen years ago when running a Novak. Cheers. 'AC'

Good point, electrics and glue don't mix well!