rotostar for ssk

[nitro_freak_123]

hi guys i have seached all of the internet but can't seem to find if a rotostart will fit on my truck (thundertiger ssk v1 with a pro-15bxs pullstart engine).

i broke my pullstarter today and i though I've had enough of this poop pullstarter i want a rotostart.

all i want to know if a rotostart will fit on my truck ?

is it easy to put on the truck does it use a one way bearing


thanks for your time nitrofreak123


truck info:

http://images.google.co.uk/imgres?i...es?q=thundertiger+ssk&svnum=10&hl=en&lr=&sa=N

 

[Monkey Wrench]

NF, so you do not get the wrong impression, I don't think anyone that frequents this forum is familiar enough with that rig to give you a definitive answer. Personally, there is not one LHS in my immediate area that carries anything Thunder Tiger, except a few planes.

Being that the mill is a .15, it is possible that a Duratrax or Hot Bodies rotorstart set-up for a .15 MAY work, but I can make no guarantees. It may be worth calling a local hobby shop that carries Thunder Tiger and asking them directly if they are aware.

 

[digger]

Maybe one off of the HPI MT2? It has a .15 in it.
If ya have a decent hobby shop. You could take the engine in there and see if it would match? Make sure there is a spot you can get the rotostart shaft through to the engine.

I haven't seen anyone talking about one here either. I've seen a couple of Thunder Tiger engines at the flying field, but not any of their cars.

 

[beason]

maby try the tiger drive?? they make a setup for the small block engines. and you use a drill to start it.