RC18T Recomendations for Pinion and Spur (Brushless)

[FastEddy]

Just looking for a starting point for Spur and pinion for an RC18T on road running a brushless setup.

 

[StrechM]

Which brushless did you decide on? It can make a diffrence.

 

[FastEddy]

Sorry, Should have known to post that.
Mini Rage brushless system 6.8KV motor.

Not sure what battery I'm going to use. Ill start out with what I have now. 6 cell 1400 Nmh but I'm sure ill go to a 7or 11v LiPo in time.

The kit comes with a 55 and a 60 tooth spurr and I have an assortment of pinions to choose from.

 

[godale03]

I am going to run the same setup in the 18T kit that I have as well. I am not sure on the pinion or spur setup either. I am also interested in finding the right combo.

Tom

 

[StrechM]

If my memory serves me correctly the FT kit comes with 3 pinions, 12, 13 and 14t. I would start with the 13 or 12/60 or 14/55 depending on yor pack.

 

[godale03]

Thanks for the tip Stretch! I am running those hot new Reedy packs for the 18T.

Tom