Punk dig question

[revoracer322]

Is there a way to wire up the punk dig so it works on a 2 pos 3rd channel, for just locking up the rear? also are you guys just soldering up the wires to the dig or are you puting in any kind of connection? Thanks guys!

 

[slowngreen]

Just solder it to the dig. I'm not positive on the 2 pos, but I would think if you just wired it like your supposed to then try your switch and see wich one it switches, front or back, then just swap the wires around if its back wards....It might work? I think I started that sentence out wrong lol.

 

[abadk9420]

I would imagine if you only had a 2 pos. 3rd channel it would work with just front dig and if I remember right one of my buddy's had his setup that way and actually just hit the servo reverse switch and had rear burn too, as for the soldering part that would be up to you, if you don't want to have to unsolder your motor wires to take out your motors then just put a Deans of similar plug inline with the wires going to your motors, I prefer to hard wire every thing less resistance and a cleaner look IMO...

 

[slowngreen]

Thats right, wasn't brandon only running a 2ps radio?

 

[revoracer322]

Well right now it has front an rear but not 4wd. So I'm not sure what to do

 

[abadk9420]

Thats right, wasn't brandon only running a 2ps radio?

Yeah he was, I have know idea as to why you only have front and rear dig with no 4WD, that's weird...

 

[revoracer322]

No one else has any ideas?

 

[slowngreen]

Ummm, thats no good. What radio is it?

 

[revoracer322]

Futaba 3pm

 

[slowngreen]

Dont quote me but I think thats the same radio h8ze2luze was running on his berg with the punk switch. Maybe pm him so he for sure see's it and ask if he had to wire it different or change anything on the tx.