Pull Start

[nitrogator]

my pull start on my aftershock wont turn the motor over unless you pull very slow but with the drill start it will turn over fine i know there is a 1 way bearing someone told me due to running so rich during breakin that the bearing is gummed up and needs cleaned just want to make sure before i tear it apart
thanks
john

 

[exitis]

99% chance that its the one way bearing. just take it out and put it in some denatured alcohol, and dry it up real good. slap back on and call it a day.

 

[nitrogator]

thanks just wanted to make sure before tearing it down