Off topic.....show your other RC vehicles.

[72Z15SS]

I put a receiver in my vintage Traxxas Fiero today and tested it. Still works! The original body, receiver w
/bec went south years ago so I bought this body for a couple bucks used many moons ago.

 

[72Z15SS]

Doing some cleaning up in my Shop and thought I would have some fun! This is my largest R/C to date. I've been building this for years and still havn't flown it. I originally built this to use an O.S. 4 cylinder in but now that the engine is older than my oldest Child, I decided to put a 50cc Gas engine in it..

 

[Cheez]

Yetilicious

 

[NITROMAN2000]

This is picture of my modified 4x4 pede. Super reliable. mods include traxxas cvd shafts.traxxas 17mm hubs. PROLINE 17mm F11 wheels with 2.8 mashers.Tacon 3650 motor and Turnigy Car X-60 esc. Only thing it really needs is a faster servo. But it can do back flips with enough hang time. p

 

[Darren Wes]

My converted tmaxx to 6s emaxx

4s 2wd lcg slash

My Arrma granite on 3s of course

2wd stampede brushed 2s for mom to drive

For when I'm wanting to do wheelies and drifts 3.5hp radio flyer wheelie go kart

 

[Deeznuts1]

A couple different toys I got. I made the buggy into a brushless and the colossus, well it's really a bad ass! Plenty of power and have not broke anything yet on it. Knock on wood

The cen has a castle esc, 2000kv motor and spectrum dx4c transmitter

 

[MetalOne]

Ok then, you asked for it!

My HPI Nitro RS4. 20 years old. Still runs great.



Next, my Tamiya TT-02D Type S. I use this body for drifting



and this one for going fast.



Tamiya XV-01. Rally goodness.



Italian cars, if you couldn't tell already, are kinda my thing. One brand in particular more than others.

 

[72Z15SS]

Ok then, you asked for it!

My HPI Nitro RS4. 20 years old. Still runs great.

View attachment 4380 View attachment 4381 View attachment 4382

Next, my Tamiya TT-02D Type S. I use this body for drifting

View attachment 4383 View attachment 4384View attachment 4385

and this one for going fast.

View attachment 4386 View attachment 4387

Tamiya XV-01. Rally goodness.

View attachment 4388 View attachment 4389

Italian cars, if you couldn't tell already, are kinda my thing. One brand in particular more than others.

Very Nice!

 

[djBarren]

Above is my ftx vantage with full stainless steel screw conversion. Full carbon chassis, brace and shock towers, aluminium steering arms and aluminium hubs. Basically every upgrade option available for the vantage. Next on the agenda is a motor and esc combo upgrade.

I also have an original release Tamiya Monster Beetle.

 

[MetalOne]

Another round? Here we go.

The Yetis. Junior and gramps.



Big Block, Small Block.



Murciélagos, grande e piccola



Baja y Baja pequeño

 

[Steveoarrma517]

 

[Dopeman]

Ok then, you asked for it!

My HPI Nitro RS4. 20 years old. Still runs great.

View attachment 4380 View attachment 4381 View attachment 4382

Next, my Tamiya TT-02D Type S. I use this body for drifting

View attachment 4383 View attachment 4384View attachment 4385

and this one for going fast.

View attachment 4386 View attachment 4387

Tamiya XV-01. Rally goodness.

View attachment 4388 View attachment 4389

Italian cars, if you couldn't tell already, are kinda my thing. One brand in particular more than others.

The Stratos is my favorite.

 

[MetalOne]

The Stratos is my favorite.

Thanks. I've always loved the Stratos. The body is a Rally Legends Stratos from HobbyKing and did not include the Alitalia livery decals. I made those at work using Flexi-sign. Had to order 9mm offset wheels for the rear and 3mm on the front.

 

[Dopeman]

Thanks. I've always loved the Stratos. The body is a Rally Legends Stratos from HobbyKing and did not include the Alitalia livery decals. I made those at work using Flexi-sign. Had to order 9mm offset wheels for the rear and 3mm on the front.

I've owned cars from almost all of the mainstream import brands from Acura to Volvo. My Alfa Romeo was my favorite. It's the one that I miss the most. Something about those Italians.

 

[NITROMAN2000]

View attachment 4069 View attachment 4070
My converted tmaxx to 6s emaxx
View attachment 4071
4s 2wd lcg slash
View attachment 4072
View attachment 4073
My Arrma granite on 3s of course
View attachment 4074
2wd stampede brushed 2s for mom to drive
View attachment 4075
For when I'm wanting to do wheelies and drifts 3.5hp radio flyer wheelie go kart

Darren, that brushless T-Maxx has to be super cool. I heard those run better than the E-maxx because the aluminum chassis is actually lighter than the plastic tub. I've got most of the parts to make one, would be a great project car for the kids to run. Do you have a battery box? Run a single pack on one side or (2) packs on opposite sides of the chassis? If you could post up more pics it would be great. Thanks

 

[BasherBrink21]

 

[Deeznuts1]

I love this pic of the colossus gst-e and my son. It's his favorite truck.

 

[Primarrma]

Got this all set up, but realised it was never going to be reliable enough to bash. I could have bought 3 arrma vehicles for what this has cost me to make it run reliably on simple tracks and small jumps. It is so much fun while it runs, but it breaks my heart and the bank so often.

This is how it began life.

My first ever outting with the slash.

 

[olds97_lss]

I have thrashed my stampede 4x4 like it owes me money and have yet to crack a chassis. Did you hit something? I run 2S and top out around 42mph, but I haven't smacked anything head on with it at speed yet. I have gotten 10+ feet under it though at the skate park. Slaps the ground pretty hard.

Losi Micro High Roller:

Losi Micro SCT:
<no photo of that for some reason>

Stampede:

eJato:

ERBE:

Savage Flux:

Savage X:

3.3 revo with OS21TM:

3.3 revo with LRP28s3:

All my bodies are beat up, besides, it's what's under them that matters.

 

[Primarrma]

I have thrashed my stampede 4x4 like it owes me money and have yet to crack a chassis. Did you hit something? I run 2S and top out around 42mph, but I haven't smacked anything head on with it at speed yet. I have gotten 10+ feet under it though at the skate park. Slaps the ground pretty hard.

Losi Micro High Roller:

Losi Micro SCT:
<no photo of that for some reason>

Stampede:

eJato:

ERBE:

Savage Flux:

Savage X:

3.3 revo with OS21TM:

3.3 revo with LRP28s3:

All my bodies are beat up, besides, it's what's under them that matters.

Awesome collection, I had a run away(I don't think I did the receiver Bind properly, I tested the fail safe after this and made sure it was fine). It went full throttle on 3s into a steel fence tube, I'd had the car running for less than 10mins.