O.s engine

[bracesonmyface3.3]

NOT TO LONG AGO I WAS GETTIN HELP ON WHAT ENGINE TO PUT ON MY
RC10GT I WAS LOOKING ON TOWERHOBBIES AND I FOUND TO AND SINCE I DONT NO MUCH ABOUT THESE ENGINES I NEED YALL HELP


THESE IS ONE I THINK WOULD DO BETTER FAR AS SPEED AND TORQUE
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHLV6&P=TS $150
AND THIS ONE I PUT ON HERE BECUZ.... IDK
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGGP7&P=TS $130

HELP PLZ AM PRETTY SURE I CAN USE EITHER OR ENGINE

 

[jts5555]

you dont need that much power i use 12 they work very well for raceing

 

[olds97_lss]

First, check your caps lock key. All caps means your screaming at us.

Second, depending on which RC10GT you have, I believe one comes factory with a side exhaust and one comes with a rear exhaust. The 18TZ is rear whereas the 18CVR is side.

If your not racing, the 18cvr is a good basher engine for side exhaust. For rear exhaust, the 18TZ is a bit overkill.

Is your current engine pull-start? The 18TZ you posted isn't a pull-start engine.

If you give us an idea as to which engine you currently have, we can give you a few recommendations for a direct drop-in that may not require more parts than just the engine.