New car no idea 🤷‍♂️

[9x19]

Brought here by dictionary.com, so that's a Purple-Nurple!

 

[CertifiedMike]

https://landlmodels.co.uk/products/ts003-1-10-tamiya-tc-01-body-190mm

Might have found my impractical one that I will

I believe you've correct!!! Fast and impractical indeed!!! Its PERFECT!

This is a GREAT project! I love it!!!

 

[lea007007]

Any one have an anti roll bar fitted to there’s ? Would love to see how it’s fitted I had bits fitted and bits in a bag

 

[Chubaka]

Any one have an anti roll bar fitted to there’s ? Would love to see how it’s fitted I had bits fitted and bits in a bag

View attachment 211255

View attachment 211256

View attachment 211257

Look through @Defiant posts. He had some. I've heard adding a sway bar kit turns it onto sn amazing handling machine.

 

[lea007007]

If this is 200mm wb, there are 8 trillion to choose from.
What are you thinking? Nascar or touring or maybe a cool truck body???

The cars arrived today just measured WB front center to rear center at 270-275 and left to right outside edge 210

 

[Chubaka]

Thread 'HPI Nitro RS4-3 Build #2'

Jul 22, 2023

I had a bunch of nitro 3 spares laying around so I decided to build another car starting with the racers edge 7076 chassis

Built a brand new rear diff, fresh bearings and new plastics

Put on brand new suspension arms, carbon shock tower, carbon fiber upper deck, Kyosho fuel tank and a hot bodies gearbox mount

• Defiant
• Replies: 8
• Forum: Nitro RC

• 

Here's some pictures of a fitted sway bar.

 

[lea007007]

Thread 'HPI Nitro RS4-3 Build #2'

Jul 22, 2023

I had a bunch of nitro 3 spares laying around so I decided to build another car starting with the racers edge 7076 chassis

Built a brand new rear diff, fresh bearings and new plastics

Put on brand new suspension arms, carbon shock tower, carbon fiber upper deck, Kyosho fuel tank and a hot bodies gearbox mount

• Defiant
• Replies: 8
• Forum: Nitro RC

• 

Here's some pictures of a fitted sway bar.

Cheers not quite the same but narrows it down a lot

 

[CertifiedMike]

The cars arrived today just measured WB front center to rear center at 270-275 and left to right outside edge 210

I wish I could see that lexan body assembled!
They make 210mm touring bodies if the 190 is too small.
You got lots of parts with this too???
I love this car!!!

 

[WickedFog]

Thread 'HPI Nitro RS4-3 Build #2'

Jul 22, 2023

I had a bunch of nitro 3 spares laying around so I decided to build another car starting with the racers edge 7076 chassis

Built a brand new rear diff, fresh bearings and new plastics

Put on brand new suspension arms, carbon shock tower, carbon fiber upper deck, Kyosho fuel tank and a hot bodies gearbox mount

• Defiant
• Replies: 8
• Forum: Nitro RC

• 

Here's some pictures of a fitted sway bar.

Man, I sure miss seeing his builds. Sickest RS4's ever. I wish I was a nitro guy.

 

[CertifiedMike]

Man, I sure miss seeing his builds. Sickest RS4's ever. I wish I was a nitro guy.

Like candy! The aluminum and carbon fiber goes together like chocolate and peanut butter!
It LOOKS like ribbon candy though and I love these cars!!!
Those parts look flawless!
The swaybar is a great idea for a runner too!

 

[lea007007]

I wish I could see that lexan body assembled!
They make 210mm touring bodies if the 190 is too small.
You got lots of parts with this too???
I love this car!!!

Hand full of parts but having not dealt with RS4’s for 25 years I don’t even know what the parts are for I forgot how small and light these are got so used to my 7.5 kilo savage and this engine looks like a skyscraper on this thing

 

[CertifiedMike]

Hand full of parts but having not dealt with RS4’s for 25 years I don’t even know what the parts are for I forgot how small and light these are got so used to my 7.5 kilo savage and this engine looks like a skyscraper on this thing

I've been working on Optima Mids lately. Not light.
This interest led me to purchase an on-road version of the mid. I bought a carbon fiber car on thebay.
When it showed up, the box was so light, I was SURE it could only contain the body and I'd found a scam!
Boy was I happily surprised at just how light these little on road cars can be!
No scam! Just AWESOME!
The Savage is just a whole other level of HUGE too!
It must be a relief in some ways!

 

[lea007007]

I've been working on Optima Mids lately. Not light.
This interest led me to purchase an on-road version of the mid. I bought a carbon fiber car on thebay.
When it showed up, the box was so light, I was SURE it could only contain the body and I'd found a scam!
Boy was I happily surprised at just how light these little on road cars can be!
No scam! Just AWESOME!
The Savage is just a whole other level of HUGE too!
It must be a relief in some ways!

Ya it’s cool got a few issues. No brakes. No electronics (I have mine) apart from servos (style I never seen) slack belts. Suspension set up is massively out. Drift tires But definitely honest seller this has never been used

 

[WickedFog]

Well, you got all the manusls and parts bag cards. Let the puzzle building begin. If you need help with anything there are a few guys in here to help you at least. Those cars look like they'd be a lot of fun to tinker around on.

 

[CertifiedMike]

Ya it’s cool got a few issues. No brakes. No electronics (I have mine) apart from servos (style I never seen) slack belts. Suspension set up is massively out. Drift tires But definitely honest seller this has never been used

View attachment 211267

SO CLEAN! You're gonna loose that after first start!
I'm not sure about this car specifically but some belt cars didn't run a lot of tension.
I've never seen a servo quite like that.
It almost looks like a custom made housing for a plastic servo! That's too cool if that is indeed the case!
Are there any markings on the housing at all?
Cool car getting cooler!!!

 

[CertifiedMike]

This body is gonna look CRAZY with that head sticking out of it and a trail of exhaust!

 

[lea007007]

Well, you got all the manusls and parts bag cards. Let the puzzle building begin. If you need help with anything there are a few guys in here to help you at least. Those cars look like they'd be a lot of fun to tinker around on.

Haven’t got the manual for the car yet will download it latter. I’m hoping it moves like a STABBED RAT with that engine in it

SO CLEAN! You're gonna loose that after first start!
I'm not sure about this car specifically but some belt cars didn't run a lot of tension.
I've never seen a servo quite like that.
It almost looks like a custom made housing for a plastic servo! That's too cool if that is indeed the case!
Are there any markings on the housing at all?
Cool car getting cooler!!!

Apparently there these servos just took one off https://hobbyking.com/en_us/goteck-...CNX3IeCHHm4zZLjx9naWc-0WDRviH_&___store=en_us

 

[CertifiedMike]

Haven’t got the manual for the car yet will download it latter. I’m hoping it moves like a STABBED RAT with that engine in it

Apparently there these servos just took one off https://hobbyking.com/en_us/goteck-...CNX3IeCHHm4zZLjx9naWc-0WDRviH_&___store=en_us

View attachment 211274

Not custom but they sure look cool!
I don't know anythimg about the brand. The specs look good for an older servo!

 

[WickedFog]

Haven’t got the manual for the car yet will download it latter. I’m hoping it moves like a STABBED RAT with that engine in it

Apparently there these servos just took one off https://hobbyking.com/en_us/goteck-...CNX3IeCHHm4zZLjx9naWc-0WDRviH_&___store=en_us

View attachment 211274

Well, she's purdy. And she's really fast. It being only 6.5kg at 7.4v it will be a bit on the weak side, but that should be fine for a road car. I wouldn't run open wheeled, especially since it doesn't appear to have a servo saver on it.

 

[lea007007]

View attachment 211273
This body is gonna look CRAZY with that head sticking out of it and a trail of exhaust!

I love it but don’t think it will fit half the left side will be removed with the exhaust so sad really