major newbie here and idk basically anything about my rc car

[kadenw968]

i have a “Flyhal x03 x04” and i don’t know basically anything. the steering servo stopped working and i don’t know what to replace it with, and on my wheels, there are rods on the hexes that are on2 wheels but not on the other two. also how do you find out the size of a hex on the wheels

 

[tntpoof]

hello .ok 1st the scale of rc.. 1/10
next is servo replaceable? des it have a serial @ . if yes track that servo down find specs,voltage torq.rotation spline #,servo city a good place for info on servo.do In have tools knowledge to do it myself? amazon a good place to find a decent cheap servo.how do you know servo dont work? tester turn car on and wont turn? they make servo testers if your thinking abo)

 

[Doom!]

Welcome aboard. I believe the hex is 12mm.

 

[kadenw968]

hello .ok 1st the scale of rc.. 1/10
next is servo replaceable? des it have a serial @ . if yes track that servo down find specs,voltage torq.rotation spline #,servo city a good place for info on servo.do In have tools knowledge to do it myself? amazon a good place to find a decent cheap servo.how do you know servo dont work? tester turn car on and wont turn? they make servo testers if your thinking abo)

the steering stopped working and i checked parts connecting the servo to the wheels, and they were fine, then i disconnected them and tried turning just the servo and it wasn’t working right. also there isn’t any writing on the servo, just the brand “cspower” and i’ve searched the web and barely found anything. besides i would probably upgrade it to a better servo.

 

[WickedFog]

That looks like a mini sized servo. But that is a 1/10 scale truck

Draw up a sketch of the servo, and measure it and put the dimensions on the sketch and post a pic of the sketch here.

 

[tntpoof]

does that servo have a sticker on it that cs looks like a sticker to me might have a name under that silver label just trying something to make things easier,

 

[WickedFog]

That's a good idea. But a lot of the servos that come in these Banggood cars don't start out as any name brand. I'd like to see a pic of this servo in the car. If a standard sized servo can fit, I'd be looking to make it work.

 

[tntpoof]

if you measure the hole distances and size of servo servo city has measurements on there site.

 

[kadenw968]

That's a good idea. But a lot of the servos that come in these Banggood cars don't start out as any name brand. I'd like to see a pic of this servo in the car. If a standard sized servo can fit, I'd be looking to make it work.

I

Welcome aboard. I believe the hex is 12mm.

is that the standard?

i have a “Flyhal x03 x04” and i don’t know basically anything. the steering servo stopped working and i don’t know what to replace it with, and on my wheels, there are rods on the hexes that are on2 wheels but not on the other two. also how do you find out the size of a hex on the wheelsView attachment 146810

 

[Doom!]

is that the standard?

That's the size hex it came with.

 

[kadenw968]

That looks like a mini sized servo. But that is a 1/10 scale truck

Draw up a sketch of the servo, and measure it and put the dimensions on the sketch and post a pic of the sketch here.

here

That's the size hex it came with.

ok