Build Showcase Majin's big rock

[majin]

This thread is for the general discussion of the RC Build Majin's big rock. Please add to the discussion here.

 

[Lostinthewoods86]

Curious to see how this one works out for ya ours is fun when it ain’t broke.

Grab some typhoon 6s shocks for it

Ours is on the bench waiting to swap in the 4s center diff setup.

 

[majin]

Curious to see how this one works out for ya ours is fun when it ain’t broke.

Grab some typhoon 6s shocks for it

Ours is on the bench waiting to swap in the 4s center diff setup.

This set of shocks?

 

[Lostinthewoods86]

This set of shocks?

View attachment 206382

Yep those

And you will need these for the top mounts

https://a.co/d/d1tGT5r

You will need to use a couple washers on the bottom mount to space it out from the arm a bit to clear the drive shaft, little longer bolt too

 

[332_RC]

I don't know why, but lately I've been eyeing a BR3S. Don't need one. But they are cool.

 

[Doom!]

I don't know why, but lately I've been eyeing a BR3S. Don't need one. But they are cool.

I believe you are incorrect, you do Neeeeeed one!

 

[332_RC]

I believe you are incorrect, you do Neeeeeed one!

Believe me- it would get tractor tires

 

[majin]

Yep those

And you will need these for the top mounts

https://a.co/d/d1tGT5r

You will need to use a couple washers on the bottom mount to space it out from the arm a bit to clear the drive shaft, little longer bolt too


View attachment 206385

Due to recent financial setbacks I had to just get a factory set for now but the 6s shocks will be ordered next time for sure

 

[Lostinthewoods86]

Due to recent financial setbacks I had to just get a factory set for now but the 6s shocks will be ordered next time for sure

Shiit, did you order them already? I can send you a set of stock shocks?

And a few other spare parts . I’ll have to look at what all I got for it

 

[Doom!]

Due to recent financial setbacks I had to just get a factory set for now but the 6s shocks will be ordered next time for sure

Financial setbacks=binge buying!

 

[majin]

Financial setbacks=binge buying!

It was too good of a deal bro
I got all 5 for 500!!! So basically bought one got 4 free!!....
But yes completely because of that lol

Shiit, did you order them already? I can send you a set of stock shocks?

And a few other spare parts . I’ll have to look at what all I got for it

I did already as the installed shocks are leaking bad ack fml
Should I cancel em?

 

[Lostinthewoods86]

Should I cancel em?

If you can I would hook ya up.

It might be Saturday before I can get to the post office to get em shipped

 

[Warby]

"Absolutely killing me to not swap the r for a c but it's a kid friendly site n all, muahahahahahahaaaaaa"

 

[majin]

rough day today.
the driveshafts i ordered are too long, ugh
so still not moving
i had to cut the old driveshaft in half to get to the screw holding it in, none of my screwdrivers were long enough to reach sadly, but i got it off lol

 

[Warby]

rough day today.
the driveshafts i ordered are too long, ugh
so still not moving
i had to cut the old driveshaft in half to get to the screw holding it in, none of my screwdrivers were long enough to reach sadly, but i got it off lol

View attachment 237865

View attachment 237866

View attachment 237867

View attachment 237868

View attachment 237869

View attachment 237870

View attachment 237871

View attachment 237872

View attachment 237873

View attachment 237874

View attachment 237875

That's the only reason I use my old hex driver set as they are longer than the MIP and reach that screw.

Its weird that my BRCC with the heavier wheels never broke many (if any) shafts. Yet my sons Senton with small tyres, would break one often.

 

[majin]

That's the only reason I use my old hex driver set as they are longer than the MIP and reach that screw.

Its weird that my BRCC with the heavier wheels never broke many (if any) shafts. Yet my sons Senton with small tyres, would break one often.

I've thrown 2 off so far, they just keep disapearing lol i got no clue where or how, none of the parts that remain are ever broken, has been weird.

 

[Warby]

@majin

I know you've already removed the old driveshafts, but another option is to remove the complete diff to get to that screw. This way you don't need a long drivers.
The diffs come out quite easily.

Like this.

 

[majin]

@majin

I know you've already removed the old driveshafts, but another option is to remove the complete diff to get to that screw. This way you don't need a long drivers.
The diffs come out quite easily.

Like this.
View attachment 238137

i think this is what I'm gonna haz to do to reasseble them, thanks bro i was wondering how i was gonna get them back on!

 

[majin]

well well well. lookit what i drug out today..
the big rocks been out of comission for a long time. i needed a new wheel hub pin for the wheel hex, finally ordered the part. but as per my norm i ordered the wrong size lol
fortuanately i ordered them too long and was able to just cut the 15mm pin down to a 12mm pin and got the hex mnounted solid again..
now i can't find my tires. lolol good times i found 1 of them so the other 3 should be around here somewhere lol
wish me luck. but I'm probab;ly gonna end up ordering a set of pre mounted tires for it

 

[Lostinthewoods86]

You’re a better man then I