Injora Front Bumper

[Polyboy33]

Wanted to see if anyone can help with what these pieces are for from my Injora front bumper…didn’t come with any instructions. First pic is the part I’m not sure of. Second, third and 4th pics are of the bumper and parts

 

[Heisenburg]

That "C" shaped thing is a headlite bulb retainer. You put the bulb in the hole, put that retainer in, then use a small screw in the screw hole.

 

[Polyboy33]

That "C" shaped thing is a headlite bulb retainer. You put the bulb in the hole, put that retainer in, then use a small screw in the screw hole.

Awesome, thank you so much! Don’t think I would’ve figured that out.

 

[Heisenburg]

I also like to paint the back side of the bulbs to prevent the glow from shining into the body. Silver paint might make the light coming out the front brighter by parabolic effect. I also use a dab of water pump glue (RTV) to further block the light from backing into the body, but mainly to keep the wire ends from bouncing and eventually breaking off.

 

[Doom!]

Awesome, thank you so much! Don’t think I would’ve figured that out.

Don't think I would have guessed that one either.