i got an scx24!! YEET

[WickedFog]

I dunno. Looks ok in that pic. Those black chunks are weird though.

 

[Doom!]

I think you should taste it and see if it tastes burnt.

 

[J’sCrawler]

Don’t tighten down the diff covers too much, they will cause binding.

 

[Lostinthewoods86]

What’s the other side of the cover look like? Could just be debris for manufacturing…orange stuff maybe a vibration dampner between the chip and the cover? Black stuff maybe from the case

 

[J’sCrawler]

Actually I remember the diff covers can cause the axle shafts to warp. Ask me how I know this

 

[majin]

Don’t tighten down the diff covers too much, they will cause binding.

nothing is extreme tight, super scared about stripping one of these screws out

What’s the other side of the cover look like? Could just be debris for manufacturing…orange stuff maybe a vibration dampner between the chip and the cover? Black stuff maybe from the case

I dunno. Looks ok in that pic. Those black chunks are weird though.

so the black was simply plastic from the case, it all blew away with a good blast

 

[majin]

Got some stuff in today gonna put it in tonight
Fingers crossed

 

[majin]

so this esc.. same thing. it just flashes and i can turn, no throttle or reverse. I'm done

 

[Lostinthewoods86]

I don’t know if it’s been asked, but what are you using to charge the battery? Is it just the usb charger that came with it? Battery looks swelled up in the pics, you sure it’s just not a bad battery?

Edit to add: I’m new to this as I think I remember you are too, but do you know the actual battery voltage? Doesn’t the esc just kill the throttle when battery voltage too low?

 

[majin]

I don’t know if it’s been asked, but what are you using to charge the battery? Is it just the usb charger that came with it? Battery looks swelled up in the pics, you sure it’s just not a bad battery?

i charge it using an amazon charger, https://www.amazon.com/dp/B08L7VCBXG?psc=1&ref=ppx_yo2ov_dt_b_product_details it works fine for others, 2-3s rated alegedly. battery has been drained complettely a few times,but i let it set for a day, then it takes a charge again, the battery tester shows it is at 99%
my front worm gear was gunked up, i cleaned it and the other gear, greased them and now they turn much smoother. but still flashing esc. when my buddy gets back to town ill borrow his battery and see if i have same issue tho. all of the rest of internet seems to want me to think its a battery issue as well. i wish it were that simple.

 

[Tunedfrog]

Not sure if you have checked these guys out but they have lots of parts.

www.rpphobby.com

 

[J’sCrawler]

Yeah that doesn’t look good.
I now remember my first battery with the scx24, it did go bad, I either left it plugged in to the esc and it drained too far somehow like a parasitic draw or, I ran it to low volt cutoff and left it for awhile, or the battery just sucked to begin with. It was my first RC, I didn’t know all the tricks yet, like resurrecting batteries with the nimh charge.

 

[majin]

@WickedFog look what was gifted to me bro! so stoked. not a brushless or an outrunner but its pretty awesome to me.
i took the 24 to furytek and had them tinker with it. turns out i fried my esc, BUT my esc still works? so it would bind, turn but not burn. i need an external esc for some reason, he hooked mine up to their rig thru the external esc and it worked just fine. 3 esc, same issue with each one. this means its a user malefunction obviously lol. but we are gonna get it fixed

 

[WickedFog]

Awesome. Furitek give you that? So they were there at the event? That is too cool.

Looks like that Furitek Igmelon kit works with your stock ESC. So it will disable your current ESC, but still use the receiver in it. So you can still use the stock radio.

 

[majin]

Awesome. Furitek give you that? So they were there at the event? That is too cool.

Looks like that Furitek Igmelon kit works with your stock ESC. So it will disable your current ESC, but still use the receiver in it. So you can still use the stock radio.

furytek was there and helped me figure out what my issue was, but no paul from exocaged rc you tube guy gave me this, we were just shootin the poop and he said he never used it and got a brushless so gave me this one, was still in the plastic shrinkwrap lol

 

[Doom!]

That's too cool. Glad you got your problem solved.