Now that these fun little trucks have been out for a little bit, what kind of upgrades are you guys putting on them?
Will they work on the new Grom Typhon?
Will they work on the new Grom Typhon?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Most definitely not aluminum arms, you never want aluminum arms. Keep it as light as possible and it won't break as often, if you use aluminum arms you'll end up snapping a chassisI have the Granite. If you are going brushless i would reccomend metal Diffs, upgrade CVD's s possibly Aluminum Arms. Brushless i went with Hobby Mate 16bl30 and motor. Everyone was saying use a motor with a 2.3mm shaft the hobbymate is 2.0mm and i had no issues with the pinion gear or mesh.
I've alreay broken a set and this wasn't from hard driving. I break another i'm looking at aluminumMost definitely not aluminum arms, you never want aluminum arms. Keep it as light as possible and it won't break as often, if you use aluminum arms you'll end up snapping a chassis
Plan on breaking a lot more stuff then. Though it is 1/18 scale. It won't be as bad as putting aluminum arms on a bigger kit, but it's a monster truck. So it's likely right there on the line of being too heavy for aluminum arms. Does RPM make arms for it? If so, I'd buy them.I've alreay broken a set and this wasn't from hard driving. I break another i'm looking at aluminum
Plan on breaking a lot more stuff then. Though it is 1/18 scale. It won't be as bad as putting aluminum arms on a bigger kit, but it's a monster truck. So it's likely right there on the line of being too heavy for aluminum arms. Does RPM make arms for it? If so, I'd buy them.
I just checked RPM's site and they have nothing for the gromGood idea, RPM.
They will. Give it a bit. It's a fairly new RC.I just checked RPM's site and they have nothing for the grom
They had the granite grom out for a few yearsThey will. Give it a bit. It's a fairly new RC.