Axioms v10 Crawler Motors

[run2jeepn]

Not much word on them Yet...The ones who have tested them. Said thats the only Crawler motor they will run...

They come in 50t, 55t and 60t...I have 4 60t Crawlers and I'm testing them as we speak. Here are the only Pic's of them...There isn't even pic's on there site of them. If you noticed the tags on them. Thats there Dyno Test results. Every motor they ship out is tested.

 

[run2jeepn]

Now I have been running these for about 2.5 weeks. They are pretty sweet. Big difference from Intgeys Lathes or even Axioms lathes. I'm just running a TQ3 and XL-5 ESC. Not the best known combo for control. But this rig as the best control I have ever drove. So I'm not changing anything.

Now I'm building my Super as we speak. And running two Mamba Max's with 2 V10 60t Handwound Crawler motors. Now from what I have heard and this is coming from other guys and Castle. (the makers of the Mamba Max) When running a dual ESC set up it double your BEC. So you can run two super hig torque servos with no RX pack. So thats an added bouns. Ok the Mamba Max is an ESC that is for Brushed and Brushless motors. Again this coming from Castle and some others. When used with a good brushed motor. You get unmatched control at anyspeed. So I'm going to put all of this to the test. Updates coming later.

 

[run2jeepn]

Axiom just released there new V10 Crawler motors in 65t, 70t, 75t, and 80t....WOW And all for just $35 bucks..I'm going to try the new 75t's myself.