arrma senton 3s

[Huyyy]

can i use the 4268 motor with 2150kv max voltages is 21V and max amps is 116A on my senton 3s with stock blx100 esc and 20T gearing
can i run it on 2s lipo and 3s lipo

 

[Greywolf74]

A 4268 is an 1/8 scale motor and the 3S Arrma rigs are designed to work with 10th scale motors which are typically more like 3650 can size. You need a 1/10 scale motor. Id look at something like the 3800Kv 1410 motor. That will do 2S or 3S but you'll need different gearing for 3S vs 2S. Get a cheap infrared temp gun to make sure you're not overgearing you rig.

 

[332_RC]

The BLX100 will burn up.

 

[Huyyy]

A 4268 is an 1/8 scale motor and the 3S Arrma rigs are designed to work with 10th scale motors which are typically more like 3650 can size. You need a 1/10 scale motor. Id look at something like the 3800Kv 1410 motor. That will do 2S or 3S but you'll need different gearing for 3S vs 2S. Get a cheap infrared temp gun to make sure you're not overgearing you rig.

thank you so much i will turn back to the stock 3660 motor and play with my team in this sunday and wait for my 6s esc ,so can i ask more question does my senton 3s can handle that 4268 motor and run it in 4s lipo and put on it a little bit bigger than stock wheel and use 20t motor gear (so sorry because I'm vietnamese and my english is not as good)

th

The BLX100 will burn up.

thank you so much

 

[Greywolf74]

thank you so much i will turn back to the stock 3660 motor and play with my team in this sunday and wait for my 6s esc ,so can i ask more question does my senton 3s can handle that 4268 motor and run it in 4s lipo and put on it a little bit bigger than stock wheel and use 20t motor gear (so sorry because I'm vietnamese and my english is not as good)

th

thank you so much

That motor is too big physically for the motor mount in that rig. Even if you could find an aftermarket motor mount that would hold it and fit a 3S senton, youd most likely destroy the internal gearing in teh driveline.

 

[Huyyy]

That motor is too big physically for the motor mount in that rig. Even if you could find an aftermarket motor mount that would hold it and fit a 3S senton, youd most likely destroy the internal gearing in teh driveline.

my 4268 motor fit on my senton perfectly and my car was already upgrade to metal diff gear and in the future i will upgrade my spur and motor gear to mod1 gear also upgrade to the metal CVD

 

[Greywolf74]

my 4268 motor fit on my senton perfectly and my car was already upgrade to metal diff gear and in the future i will upgrade my spur and motor gear to mod1 gear also upgrade to the metal CVD

Hmmmmm, I didnt realize that the Arrma 3S kits had 30mm mounting holes for 1/8 scale motors. Well seems like youve answered your own question then. Good luck.

 

[Huyyy]

Well seems like youve answered your own question then. Good luck.

thank you so much for spend a little time for me!
have a wonderful day!

 

[Greywolf74]

Actually, from what I'm reading online it doesn't have 30mm mounting holes, it has the standard 25mm holes that 3660 motors have so I'm not sure how you're fitting that motor in the rig unless youve already upgraded your motor mount?

 

[Doom!]

If you put too much power in the 3S line your going to start breaking parts, be careful.

 

[Huyyy]

Actually, from what I'm reading online it doesn't have 30mm mounting holes, it has the standard 25mm holes that 3660 motors have so I'm not sure how you're fitting that motor in the rig unless youve already upgraded your motor mount?

i dont know but my big motor is perfectly fit in my stock senton 3s blx motor mount my 4268 motor is Skyrc X8 Pro 2150kv
(my stock motor is spektrum firma 3200kv SPMXSM2000)