• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

Advice please?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Benny172

RC Newbie
Messages
2
Reaction score
0
Points
0
RC Driving Style
Hi there,
I've had my nitro car sometime now ansmann vapor it's the second car I've owned so far, so my experience is not that great when encountering problems. My car constantly runs with the throttle trim set at 15 (I have a digital transmitter) which is practically all the way out? When I brake hard it cuts out

Any advice guys

Thanks.
 
Welcome to RCNT.
Let me give you some advice before the mods do. Don't post multiple threads about the same subject.
Set you carb and radio back to the stock settings and try again. If it won't run that way then something's wrong.
 
if its dying when you hit the brakes then you either need to turn your idle screw in a little more so the throttle servo can't close the idle gap or you need to adjust your throttle linkage so when its in full brake mode its not pushing the carb closed. Possible a combination of both of these.
 
Back
Top