3 cell lipo ???

[chip cross]

You boys know of a 3 cell lipo that will fit in a Rc18b in the stock location under the battery hold down ? I have looked so if you feel the need to flame please do so, just answer the question.

 

[robmob]

http://www.maxamps.com/proddetail.php?prod=Lipo-1550-111-Pack&cat=144

I haven't personally tried it, but it is only 20mm tall so it should fit.

If not, perhaps you can raise the hold down screws a tad for it to work. You can also just us longer screws and a washer to attach the ends of the hold down.

 

[sweetdiesel]

Maxamps carries a 1550mah unit.

http://www.maxamps.com/products.php?cat=143


Edit: Rob beat me to it.

Apogee makes them too.

https://pfmdistribution.com/secure/shop/item.asp?itemid=242&catid=61

You can't go wrong with either pack.

 

[alpinehyperlite]

The site says this one should fit.
http://pfmdistribution.com/secure/shop/item.asp?itemid=242&catid=61


NVM got beat to it.

Or this one for $15. http://pfmdistribution.com/secure/shop/item.asp?itemid=229&catid=66