1/64 RC F1 car advice

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Razor007

RC Newbie
Messages
2
Reaction score
4
Hey guys I’m looking for advice on building a 1/64 RC F1 car, the model is a Ferrari F2003GA from Kyosho. The plan is to hollow it out, and somehow package a 1.8g servo (S18JST), 30mah battery, rx45 receiver, and 3 or 4mm motor. Using some paper I made some rough boxes of those components and placed them next to the car. It’s… going to be a very tight fit. If anyone can give some advice on smaller servos, or other methods to make it more compact that would be great :)

B06982B2-1868-41C8-8255-E4E278105AEC.jpeg


28296145-9A3D-4438-BC01-03B64E7FFB5B.jpeg


3BA431D8-4ACA-4697-828A-70418730D8CA.jpeg


9774E8E0-A646-434A-B469-619AF66A7B13.jpeg
 
Welcome to RCT! :welcome_sign:

I'm not really a micro guy so I'm not sure I have any meaningful advice but it will be interesting to see the process. :)
 
Welcome to the forum. There is a guy on YT that does some sick 1/64 builds. You might do some searching around there.
 
I've seen these videos but don't remember his channel.
 
Hey guys I’m looking for advice on building a 1/64 RC F1 car, the model is a Ferrari F2003GA from Kyosho. The plan is to hollow it out, and somehow package a 1.8g servo (S18JST), 30mah battery, rx45 receiver, and 3 or 4mm motor. Using some paper I made some rough boxes of those components and placed them next to the car. It’s… going to be a very tight fit. If anyone can give some advice on smaller servos, or other methods to make it more compact that would be great :)

View attachment 153724

View attachment 153725

View attachment 153726

View attachment 153727
I want this!!
 
Hey guys I’m looking for advice on building a 1/64 RC F1 car, the model is a Ferrari F2003GA from Kyosho. The plan is to hollow it out, and somehow package a 1.8g servo (S18JST), 30mah battery, rx45 receiver, and 3 or 4mm motor. Using some paper I made some rough boxes of those components and placed them next to the car. It’s… going to be a very tight fit. If anyone can give some advice on smaller servos, or other methods to make it more compact that would be great :)

View attachment 153724

View attachment 153725

View attachment 153726

View attachment 153727
Welcome to the forum.

Youtube is probably going to be your best resource. There is a local guy here that has done a few Nissans and other street cars but there is a lot more real estate in those chassis.

Good luck, looks awesome and I hope to see more.
 

Similar threads

Back
Top