a-arm

Today i was drving my t-maxx around. Just running up and down the street. So as I'm goin down the street a rock jumped out in front of me!!:marshall: (Neighbors were doing yard work.) So i hit the rock goin maybe 1/4 throttle and the Lower RPM a-arms snapped. And the 2 shocks snapped...

WTS New Maxx 2.5 RPM A-arms and Knuckles!! Whaddup guys, I've got a full set of new 2.5 RPM Maxx A-arms in Black. I've also got a full set of new RPM Knuckles/Axle Carriers in purple with the beefy oversized bearings. The RPM Axle Carriers are arguably the best on the market, they're strong...

Hi I was just trying to figure out which mounting hole on the rpm arms are the closest to stock I have the stock top shock mount w/the shocks mounted in the middle hole and on the rpm arms I have the shocks mounted on the inner most hole. My problem here is that I have 50 weight oil(2 hole...

What exactly is the difference in width between the 2.5 maxx and the .15 Is it worth upgrading?Or jutst go with what ya have till it breaks.. if it breaks

hey guys. my e-maxx is on the way I'm at school so ill post pics tonight but man is it looking good. now heres my dilema i want this truck to look strait up awsome but when i make a show/project truck i also make realy high performance. so it would probaly be under the catagory show/drag or...

i am having a machinest down the street to make my a-arms 1 inch wider shh gaurantee i will be the first to have an extended a-arm BFT let me tell you i thought it over it will handle like a beast and this machinest that is doing it for me it the best he will make sure it wont break and he will...

Well, i realized that when i recently crashed my t-maxx, i didnt just kill one of my shocks, i also broke my right upper A-Arm. I figure that i might as well go for alluminum replacements so it wont happen again. I'm only going for the front (both upper and lower) for now. I was just wondering if...

I need A-Arms for my RC10DS. I need both front and back, i have broken one of each, and i also wanted new caster blocks. anybody have any ideas?

Hi there! Well I finally did it. i crashed my maxx and did pretty good damage too.. what I need to know is i have replacement rpm a-arms and i notice there is no room between the bulkhead and the arm for the stock spacers ..{I think they are for caster}..I'm including a pic to better describe...

What do they use for the drive shafts since the arms are longer> Is there a stainless or steel shaft that will fit the 2.5?

Does anyone know how much a stock upper and lower a-arm weigh? And what does an RPM upper and lower a-arm weigh. Anyone with a good accurate scale that could help me out would be greatly appreciated. I was wondering what the total difference in weight would be switching from stock arms to RPM...