Alright guys and Gals, I got the new true track A arms and My driveshafts are not long enough to reach the hubs any longer I am running a Big Block conversion on my Maxx and Have the Steel CVD's I believe they are 128.5mm. What I am wondering is if Traxxas or someone makes a CVD that is a...
I'm trying to decide if I should buy the flextek titanium arm kit http://www.rcplanet.com/Flextek_Comp_Titanium_Suspension_Arm_p/fxt10001.htm
or if I should get the RPM a-arms and use the money I would save on other parts.
I stole this photo from another site.
This is a pic from I-Hoby.
Vantge has this Revo on display. Look at the A-arms.
Pretty damn cool.
Hang loose, trying to get the photo to work.
Notice my upper and lower A-arms have been breaking at the pin and popping out, for awhile I just fitted it back together and put the pin back in, but upon further inspection I noticed they were actually cracked and just pulling through the pin. Ok fair, I have lots of extra A-arms.
Now you...
I have a full set (4 upper, 4 lowers) New In Package, White Dyeable A-Arms for the Original width .15 TMaxx. NOT the WIDE ones for the 2.5 TMaxx/EMaxx..
PayPal Only...
Will ship USPS Priority Mail
$30 shipped
i havent saved enough money yet to buy new aluminum ones that i want so i need to fix the one i have,. i tried to glue it but it didnt work. do you have any suggestions??
does anyone use them?
I seen some made by fast lane machine and was wondering wether there worth getting
they would make the truck an inch wider so i'm thinking it should corner better
also one last question does anyone know of any other manufacturers that make them for a savage
All...
RPM has created front A-arms for the Electric version of the Traxxas Rustler and Stampede. Traxxas has recently introduced newer, more powerful versions of the Electric Rustler & Electric Stampede, combined with emerging technologies in both battery and motor power, it was time for RPM to help...
WoodiE
Thread
a-arm
electric rc
monster truck
traxxas rustler
traxxas stampede
So i was mashin' along in a ditch and *SNAP* i busted my tranny. While i was at the hobby shop picking up gears i figured i would get some A-arms too, so i just got em installed and i figured i would post some pix. Now i gotta take a trip back to the hobby shop tomorrow and get some more gears...
hi, i was looking at getting some new a-arms. i was looking at alot of them and i stumbled upon a video were a guy had a savage 25 and really long a-arms. so i started look ing for arms like that but i can't find any like that. so, can you guys help me or give me any information about it, if they...
For all everyone looking to shed some unwanted, unsprung weight, RPM has you covered! RPM Savage X A-arms weigh in at less than the stock Savage A-arms due to our low profile designs. The low profile combined with the beveled leading and trailing edges of the RPM Savage X A-arms prevents them...
The new Traxxas T-Maxx 2.5R and 3.3 - use Revo style axles which are much larger in diameter than older version axles and create interference issues on our current A-arms for the T-Maxx 2.5 (#80071 - #80078). RPM's newest A-arms for these trucks compensate for the larger axle diameters with axle...
The Team Losi LST2 uses similar, although a slightly wider outer hinge pin mount than the original LST. RPM's LST2 A-arm adapter kit makes up that difference and allows you to use RPM's ultra-durable LST A-arms (#73192 - black & #73195 - blue) to mount to the Team Losi LST2. This kit, combined...
I just came across this from Flex Tek, cast ti a-arms that are supposedly flexible. They look awesome! There is a good review on BYT also.
http://www.flextekrc.com/index.shtml
http://www.beatyourtruck.com/prodreviews-suspension.html
i'm not sure about this but i though i remember reading somewhere that rpm a-arms have a life time guarantee. i could be mistaken though. but anyways i bought them and a buddy ran into me not going very fast and the lower one pulled right through the shaft that connects it to the truck. i...