General RC Information
Hi everyone, Thanks for stopping by to my Arrma Felony Serena II Project i bought this car as a slider\roller off eBay along with the orange stock body last month and bought a silver set of front and rear hoons this month. And so far i've been enjoying looking at her and now that she's fully ready i'll taking her out for her first "Official" run on 6s although she has an 8s capable ESC.
Here's her current setup.
Castle Creations Mamba Monster X 8s Brushless Sensored (Currently running Sensorless) ESC with x2 Perfect Pass QS-8 V2 connectors soldered in Series
Castle Creations 1717 Sensored (Running Sensorless currently) 1,650kv Brushless Motor
Arrma Safe-D5 Mod 1 16 Tooth Steel Pinion gear meshed to Stock Arrma 46 Tooth Mod 1 Spur gear (May gear up to a 21 - 23 tooth depending on conditions someday)
Amazon Special DS3225MG 25kg Servo (Have plans to upgrade to a Perfect Pass Monster 1\10 - 1\8 56kv Brushless HV Servo someday)
Currently running the Radiolink RC8X 8 Channel 2.4Ghz Transmitter bound to a Radiolink R8FG V2.1 8 Channel Gyro 2.4Ghz Receiver (Have plans to buy the new Spektrum IXSR TX along with a new SR6200A AVC RX sometime next year)
Currently running x2 Zeee 6,200Mah 11.1V 120C 3s LIPO Batteries both with Perfect Pass QS-8 V2 Connectors in Series to make 6s (Have plans to upgrade to either CNHL x,xxxmah or GA G-Tech Bashing 8,000mah 3s Batteries someday) I don't currently have plans or have it setup to run on 8s
Arrma Dboots Hoons 42\100 front and 53\107 rear all in Silver compound (May switch out the Hoons out for a set of Power Hobby Grippers and swap rear diff gears to front\rear Infraction gears someday)
Stock shock and diff fluids
Stock 15\42 GP5 front and 14\46 GP6 diff gears (Have plans to eventually swap to full Infraction 6s Diff gears in the rear)
Stock Orange body with black wing and Included twin turbo hood accessory kit and front mounted Intercooler with rubber hosing
Here's some extra pics.
Here's when i first got her i was to see they shipped in both the factory boxes for the main car
Here she was right of the boxes.
Future Plans\To Do List.
Gear up to a 21 or 23 tooth pinion gear
Buy a Motor heat sink with HV fans
Buy a HV Fan\Power switch mount for my MMX8s ESC
Swap out current servo to a Perfect Pass Monster servo
Swap in a Spektrum SR6200A RX for my future Spektrum iXSR TX
Buy a set of GA G-Tech Bashing 8,000Mah 3s Batteries
That's all for now let me now what you all think of my car and build.
Here's her current setup.
Castle Creations Mamba Monster X 8s Brushless Sensored (Currently running Sensorless) ESC with x2 Perfect Pass QS-8 V2 connectors soldered in Series
Castle Creations 1717 Sensored (Running Sensorless currently) 1,650kv Brushless Motor
Arrma Safe-D5 Mod 1 16 Tooth Steel Pinion gear meshed to Stock Arrma 46 Tooth Mod 1 Spur gear (May gear up to a 21 - 23 tooth depending on conditions someday)
Amazon Special DS3225MG 25kg Servo (Have plans to upgrade to a Perfect Pass Monster 1\10 - 1\8 56kv Brushless HV Servo someday)
Currently running the Radiolink RC8X 8 Channel 2.4Ghz Transmitter bound to a Radiolink R8FG V2.1 8 Channel Gyro 2.4Ghz Receiver (Have plans to buy the new Spektrum IXSR TX along with a new SR6200A AVC RX sometime next year)
Currently running x2 Zeee 6,200Mah 11.1V 120C 3s LIPO Batteries both with Perfect Pass QS-8 V2 Connectors in Series to make 6s (Have plans to upgrade to either CNHL x,xxxmah or GA G-Tech Bashing 8,000mah 3s Batteries someday) I don't currently have plans or have it setup to run on 8s
Arrma Dboots Hoons 42\100 front and 53\107 rear all in Silver compound (May switch out the Hoons out for a set of Power Hobby Grippers and swap rear diff gears to front\rear Infraction gears someday)
Stock shock and diff fluids
Stock 15\42 GP5 front and 14\46 GP6 diff gears (Have plans to eventually swap to full Infraction 6s Diff gears in the rear)
Stock Orange body with black wing and Included twin turbo hood accessory kit and front mounted Intercooler with rubber hosing
Here's some extra pics.
Here's when i first got her i was to see they shipped in both the factory boxes for the main car
Here she was right of the boxes.
Future Plans\To Do List.
Gear up to a 21 or 23 tooth pinion gear
Buy a Motor heat sink with HV fans
Buy a HV Fan\Power switch mount for my MMX8s ESC
Swap out current servo to a Perfect Pass Monster servo
Swap in a Spektrum SR6200A RX for my future Spektrum iXSR TX
Buy a set of GA G-Tech Bashing 8,000Mah 3s Batteries
That's all for now let me now what you all think of my car and build.
- RC Type
- Car
- RC Brand
- Arrma
- RC Model
- Felony 6s BLX
- RC Scale
- 1/7 Scale
Technical Specifications
- Power Source
- Electric
- Battery Type
- LiPo
- Motor Type
- Brushless
- Drive System
- 4WD (Four-Wheel Drive)
Additional Information
- Budget
- $800-999
- Challenges Faced
- Deciding whether i want to buy the base car as an RTR or Silder, Having the money available to buy and build the car,