Just last month RPM released their Front A-arm set for the ECX Torment, Ruckus, and Circuit. This month they follow it up with a set of REAR A-arms! The Rear RPM ECX a-arms feature leading and trailing edges making the a-arms more aerodynamic and also allow the ECX rear a-arms to transition up and over…
The ECX Torment, Ruckus, and Circuit RC’s continue to increase in popularity and are now receiving some love from RPM Products with a set of black front A-Arms. The RPM front a-arms for the ECX not only more aesthetically pleasing than stock. The angled leading and trailing edges are more aerodynamic and allow the A-arms…
RPM customers have been telling them for a long while now that the stock extended a-arms for the Traxxas Summit / Revo was not holding up. RPM held out on the a-arms thinking Traxxas would design a new chassis due to the weird geometry found on the trucks… Traxxas didn’t and now RPM has released…
RPM has super-sized one of R/C’s incredibly useful tool, the RPM Bearing Blaster. The new Mega Bearing Blaster has been designed to fit bearing sizes found in large 1/5th scale RC’s as well as skateboards and rollerblades – up to 1.25″ (32mm in diameter)! Now you can extend the life of your bearings using the…
A lot of Traxxas RC are using the Traxxas VXL-3S ESC, the only down side is many people have broken off the small tabs that are used to mount the ESC. Enter RPM to fix the issue with their new ESC Cage that securely locks the VXL-3S in place! Made from RPM’s unbeatable nylon you…
RPM has released a wide front bumper for the Associated B44 (B44.1 and B44.2) buggies, something the stock B44 buggies do not offer, front-end protection. The RPM wide front bumper is 5″ wide and extends forward over 1.5″ to protect the front shock tower, front A-arms and the front differential housing.
RPM has good news for Traxxas Summit owners with the release of their new front a-arms! Well actually front left a-arm as the Traxxas Revo front right a-arms (part #: 80212 & 80215) also fit the Traxxas Summit right front. The current RPM Revo left arms would not fit due to the extended T-Lock differential…
RPM has a new front shock tower for your Associated SC10B, SC10.2, and T4.2FT that’s been designed with one goal in mind, survivability! The new shock tower increased and improved support in all the vital areas of the stock shock tower and of course made from RPM’s indestructible plastic. Made in the USA and covered…
RPM front A-arms for the Associated ProLite 4×4 and Thunder Tiger Sparrowhawk/Tomahawk RC vehicles were designed to add some needed strength and durability to these RC’s. The ProLite RPM A-arms are manufactured using RPM’s trademark blend of extremely tough nylons allowing our A-arms the ability to easily shrug off crashes that would break stock parts.
RPM has added to their already long list of durable parts for the Traxxas Slash 4×4 and Traxxas Stampede 4×4 trucks with their new Caster and Spindle blocks. RPM used a lower-case “H” structure for their core design when designing the caster blocks which provides extreme rigidity to keep camber and caster setting locked in…
Better late than never… RPM has finally released front and rear bulkheads for the ever popular Traxxas T-Maxx and E-Maxx trucks. RPM has taken their trademark nylon and redesigned key areas of the Maxx bulk heads to reduce common stock bulkhead breakage. RPM also incorporates a series of lock nuts at the chassis and skid…
Rocks, dirt, and other debris striking shock shafts all lend to dent, dings, and burrs which in turn leads to torn and worn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of your shock shaft, which…