Which mini

[mxracer]

I live on a farm and have 50 acres of land. I have a 2 km long motocross track and lost of open land. I was looking at the rc18mt. is this a good choice? Is it stong enough for a very hard life? Is there super moters that can go in it. (I'm new to micros so I don't know anything about them) I have been looking at lots of motors and esc's but have no idea what the #s mean.:\
Can anybody help???????????????????:dumb:onder2:

 

[Rs4 drift]

id go with a 1/10 scale rather then the micros

 

[mxracer]

id go with a 1/10 scale rather then the micros

I also have a VERY BIG HOUSE with a R/C track in the basement. I can't run a nitro car/truck or a 1/10 because my track is to small. My dad also has all of his shooting trophies (142(which take alot of room) and my R/C table with all my stuff on it.

 

[BMILLER]

1/10th electric should doo

 

[mxracer]

But I don't want a 1/10 I have 2 already. I want a little one that I can run on my track and chase my cats, dogs and horses and sheep with. They don't run away from a 1/10 scale(Don't know y, they should) I have a 1/20 scale that goes to slow that they run away from but as i said it goes to slow.

 

[flandersander]

maybe strap a model rocket engine to it and watch her fly!

 

[mxracer]

maybe strap a model rocket engine to it and watch her fly!

I did that. I guess it was not big enough as it did not go far. ANYWAY thats off topic CAN ANYONE HELP ME??????????????????????????????????????????????????????????????????????
?????????????????????????????????????????????????????????????????????????

 

[marauder]

RC18MT would be an excellent choice. The link below in my signature tells you how easy it is to convert the RC18MT to a T/B/R, so you'd essentially have 2 in 1 with a few extra parts. I say go with it, you can't go wrong with the AE RC18 series.

 

[Brushlessboy]

The RC18 ceries are great. I only have the 18R, (check out my albumns) and it has the 8000kv castle creations brushless. With 2s lipo your farm animals are toast, with 3s the ones in AFRICA are toast.......

P.S 8000kv really is too much for a 1/18 but is fun. Around 5600kv would probably be a bit more driveable......

 

[alpinehyperlite]

Yea, i have the Castle Creations Micro Sidewinder 5400 on a 3s lipo in my 18tr. (yes TR, Truggy) it hauls ass, and with a hitek servo, it handles like its on rails. Maybe also because i have that huge lipo in there weighing it down.:shrug:

 

[mxracer]

Dose it have enough ground clearence to get over moderate sized rocks?Dose it take ALOT of abuse before it will break? Dose RPM Mmakeparets for it?(I have Dial up and cannot load there page)

 

[alpinehyperlite]

A: With brushless, moderate rocks are ramps. B: Havent broken anything yet, and I've done double back flips off speed bumps, and cartwheeled at 50mph+. C: YES

 

[mxracer]

Is there any other MT MINI that is as tough?

 

[alpinehyperlite]

not that i have seen.....

 

[mxracer]

I finaaly got the AE web site up (45 mins) is it really 278

Dollers$$

 

[marauder]

No, that's MSRP.

$169.98 From towerhobbies.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXKCC2&P=ML

 

[mxracer]

COOL thanks

 

[alpinehyperlite]

bout 150-175 stock here

 

[chelseafc385]

I have an XTM Rage, its fast and its a 1/18 scale.

 

[Mattyfats420]

there is also the Losi Mini LST which i had one. its a great Truck. parts are easy to find, there very quick stock. and about the same price as a RC18MT

but i also have an RC18MT and its also a great truck. for the money. you definetly can't beat the RC18 series.