which fly wheel/clutch/bellhousing?

[dantheman1986]

right guys i have a traxxas trx 3,3 engine that i am fitting into a a spare chassis i have as a basher car. could i fit the clutch flywheel and bell housing from the engine that was originally on the chassis?? that way i know the gears will meet up ect? its a 2 speed chassis

 

[LBSinGTX]

If it is coming off a TRX engine going onto another TRX engine for the same model (ie revo to revo, or t-maxx to t-maxx), then yes.

 

[dantheman1986]

No the chassis is not traxxis its a different make

 

[Metalhead Matt]

Crank shafts gonna be to short for the clutch bell.

 

[Scrogg]

It may be a bit short, but Ofna makes some narrow clutchbells, so does Kyosho. Just use the Traxxas flywheel and some dynamite maxlife shoes for that flywheel. Put whatever size CB you need on it. What scale and make r/c are you talking about?

 

[dantheman1986]

The engine is a trx 3.3 and I'm tryin to retro fit it onto a hsp atomic warehead chassis, an yes I know there cheap an nasty but hey I thought I'd try. It will be fun while it lasts. Its a 1/10th scale chassis and a 2 speed