robmob
LET’S GO BRANDON!
Staff member
Supporter
Excellence Award
Here are the completed pics before it's maiden run.
It was a fun build and all I can say is thank god for the Dremel tool.
Started with Axial ARTR
• HBZ Warthog Pro Comp SS Chassis
• Holmes Hobbies 7T Puller Motor
• MaxAmps S3 2000mah Batt
• Castle BEC
• Mamba Max ESC
• MIP C-Drive Splines (No. 08101)
• Losi Crawler Shocks (No. LOSA5082) with Losi Yellow Springs (No. LOSA5148) in the rear and HPI shaft ends (No. 85050)
• Losi Rock Claws
• Proline 8-Shooters
• GH Racing Silver Aluminum Servo Mounts (NO. 04038)
• Hot Racing Hard Anodized Tranny Gear Set (No. SCP1000T)
• East End Machining Motor Mount
• East End Machining Delrin Tranny Mounting Plate
• CDW Chromoly Tranny Outputs
• STRC Black Aluminum Lock Out with Steel Driveshafts in the rear (No. STA30494BK)
• STRC Black Aluminum Upper Suspension Link Mounts (No. STA80015BK)
• STRC Black Aluminum Hub Carriers (No. STA80012BK)
• STRC Black Aluminum Steering Knuckles (No. STA80004BK)
• Axial Universal Set (No. AX30464)
• Axial Heavy Duty Bevel Gear Sets F/R (No. AX30395)
• Axial Upper Link Plate (No. AX30497)
• Axial Slipper Clutch (No. AX30414)
The 7T Holmes Hobbies Cobalt Puller Motor is insane with the 3S lipo I am using. If I can't climb over it, I can just jump over it.
Shortly after these pics, it got it's first rock rash followed by much more. She is no longer nice looking on the underside.
I have already started ordering parts for my next build which will use the Bender chassis and the RS4 bug body.
It was a fun build and all I can say is thank god for the Dremel tool.
Started with Axial ARTR
• HBZ Warthog Pro Comp SS Chassis
• Holmes Hobbies 7T Puller Motor
• MaxAmps S3 2000mah Batt
• Castle BEC
• Mamba Max ESC
• MIP C-Drive Splines (No. 08101)
• Losi Crawler Shocks (No. LOSA5082) with Losi Yellow Springs (No. LOSA5148) in the rear and HPI shaft ends (No. 85050)
• Losi Rock Claws
• Proline 8-Shooters
• GH Racing Silver Aluminum Servo Mounts (NO. 04038)
• Hot Racing Hard Anodized Tranny Gear Set (No. SCP1000T)
• East End Machining Motor Mount
• East End Machining Delrin Tranny Mounting Plate
• CDW Chromoly Tranny Outputs
• STRC Black Aluminum Lock Out with Steel Driveshafts in the rear (No. STA30494BK)
• STRC Black Aluminum Upper Suspension Link Mounts (No. STA80015BK)
• STRC Black Aluminum Hub Carriers (No. STA80012BK)
• STRC Black Aluminum Steering Knuckles (No. STA80004BK)
• Axial Universal Set (No. AX30464)
• Axial Heavy Duty Bevel Gear Sets F/R (No. AX30395)
• Axial Upper Link Plate (No. AX30497)
• Axial Slipper Clutch (No. AX30414)
The 7T Holmes Hobbies Cobalt Puller Motor is insane with the 3S lipo I am using. If I can't climb over it, I can just jump over it.
Shortly after these pics, it got it's first rock rash followed by much more. She is no longer nice looking on the underside.
I have already started ordering parts for my next build which will use the Bender chassis and the RS4 bug body.
Last edited: