Ok so my tmaxx 2.5 used to do wheelies like crazy being paired up with a motor Saver filter and ths pipe and using bones brew 30/10. The last few times I've taken her for a rip it seems very sluggish and sorta bogs at first. Can't get the wheels up to save my life. Doesn't run hot I clean the filter after each run and always use ARO. I did notice yesterday that no matter what I did with the needle settings it would literally pool up a pudle of fuel on my tailgate. I can get it to run ok I guess and still rip it up and jump it and what not but it just feels if it were a V8 it would be running on like 6 cylinders. The idle is a little high after I let off from a wot pull and if it flips over it'll take off to like 16000 rpms untill I hit the break to stop the wheels. Sorry for the long ass story just don't want to leave anything out. Also has anyone had issues with the break arm sticking almost like there should be a return spring or something idk. Any help would be great this thing runs like garbage thanks