hondaman
RCTalk Member
I am searhing for an upgraded traxxas jato throttle linkage does anybody make one
-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
traxxas jato upgraded throttle linkage
- Thread starter hondaman
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
What are you looking to replace and why?
You can buy bits and pieces that aren't traxxas. Just curious what your trying to do. I don't know of an "upgraded" linkage.
You can buy bits and pieces that aren't traxxas. Just curious what your trying to do. I don't know of an "upgraded" linkage.
for me its the break linkage the needs reworked. got a big mod in text for that. my e-mail is down right now
I replaced the arm on the brake shaft with an alloy one, used fuel line vs a spring as the bumper near the servo/adjustment nut and hacked at a way to use dual disks for brakes.
Probably dual disk and fuel line would be all that's needed to make for better brakes.
Hot racing makes the hub and a dual brake kit as well:
Hub only: http://www.liquidrc.com/index.php?m...cts_id=58792&zenid=giigdit1i2jvsd75grm69d32g5
Dual disk kit: http://www.liquidrc.com/index.php?m...cts_id=58791&zenid=giigdit1i2jvsd75grm69d32g5
I think I'd get the hub and just buy a second set of stock brake/shoes for the jato and a couple longer bolts. I'd rather run fiber disks with steel pads than the other way around. In theory, will last longer that way since theres more fiber surface area being ground down.
Probably dual disk and fuel line would be all that's needed to make for better brakes.
Hot racing makes the hub and a dual brake kit as well:
Hub only: http://www.liquidrc.com/index.php?m...cts_id=58792&zenid=giigdit1i2jvsd75grm69d32g5
Dual disk kit: http://www.liquidrc.com/index.php?m...cts_id=58791&zenid=giigdit1i2jvsd75grm69d32g5
I think I'd get the hub and just buy a second set of stock brake/shoes for the jato and a couple longer bolts. I'd rather run fiber disks with steel pads than the other way around. In theory, will last longer that way since theres more fiber surface area being ground down.
