Throttle turns the front left and right?

[Ducnut1]

I made the newbie mistake of working without my stand, needless to sayt my gen 8 flew off the table.I was trying to lower it a little when I hit the throttle. Gave up on lowering it a bit but now when I accelerate the front wheels go right and left. What now?

 

[Xraycer]

I made the newbie mistake of working without my stand, needless to sayt my gen 8 flew off the table.I was trying to lower it a little when I hit the throttle. Gave up on lowering it a bit but now when I accelerate the front wheels go right and left. What now?

Were the servo and esc plugs ever removed from the receiver during this service session?

 

[Ducnut1]

Were the servo and esc plugs ever removed from the receiver during this service session?

No

 

[Xraycer]

No

Does the steering wheel now controls the throttle?

 

[tntpoof]

check your reciever. not sure what type of radio you have. sound like reciever plugs got switched. check channels 1 is steering 2 is GO

 

[STONER RC]

Definitely sounds as if the servo wires got miss placed.. that's the only way I see that happening.. #1 thing with RCs is controll which would be steering..so
#2 would be the forward and reverse..

Channel#1 steering
Channel#2 throttle/esc

If you have more channels then after those 2. It would be up to what you put on rid or what ever else you are useing bud