Throttle Servo

[Newsboy]

This has just stumped me. I have the stock servo in my Revo. It is not hitting anything but the servo will only open the throttle about 30%. I have tried to change the setting on the controller but it does nothing. Any ideas?

 

[Raiden101]

Pure guess here, but it might be a bad servo. That's just a guess

 

[Metalhead Matt]

You probably have to move the linkage farther towards the outside of the servo horn. This will give ya more throw.

 

[Raiden101]

I would go with MHM on that. I remember have to fix that on mine a while back after I replaced the servo

 

[Newsboy]

Thanks for the help guys. Took some things apart, made some adjustments, and by Gods grace got it put back together . Now I just need to get my brakes to work again

 

[vmswimfan21]

when i 1st got my revo it did that but it opened about 75% and i didnt notice for awhile i did like mhm said but i had to move the carb slide a couple times by hand to free it up or something cause it would kinda stick and not want to open

 

[olds97_lss]

You can also turn the carb a bit to get it to have more movement. The stock TRS is a bit stiff and really works the servo hard. I redo the linkage on mine so I can use a softer TRS, but I also use a better servo that moves very easily when power is cut.