Tamiya tt02 speedruns

[Mazduh3]

I believe that I'm tapped out at 67mph.
Gearing 66t/40p on 3s
I'm using a mamba x and a 4600kv motor
I was trying to achieve low 70s to mid 70s but I'll settle for this until I can find a new motor..

 

[Kimmie28]

Try a castle 5700kv. I have one in my dr10 and it's almost uncontrollable in a drag setup. I use a sidewinder 4 and 3s and have hit low 70s in it. Can't remember gearing but didn't change it from stock

 

[Greywolf74]

Gratz on 67mph!

 

[Mazduh3]

Try a castle 5700kv. I have one in my dr10 and it's almost uncontrollable in a drag setup. I use a sidewinder 4 and 3s and have hit low 70s in it. Can't remember gearing but didn't change it from stock

I'm pondering a few motors
One motor
Second motor

Theses are rated at 3s. Trying to stay around 3s range.

Also looking at at tp motor. But I am waiting to keep it as a sensor setup

 

[Greywolf74]

I'm pondering a few motors
One motor
Second motor

Theses are rated at 3s. Trying to stay around 3s range.

Also looking at at tp motor. But I am waiting to keep it as a sensor setup

your going to need one beefy ESC to run those motors. Especially the 2.5T

 

[Mazduh3]

your going to need one beefy ESC to run those motors. Especially the 2.5T

Already have one...... so no worries.
I just want to limit myself to staying between 2s and 3s. And in the 70 club.

 

[Greywolf74]

Those extreme kV motors are gonna get hot and quick. Let us know how it works out