Super Glue Help!

[SpeedyBooty]

I didnt know where else to post this so I guess here is okay, So basically I stripped some threads on my plastic hub piece and I decided to super glue the screw into it and now it wont come out ( very smart I know ) I tried everything, veggie oil, rubbing alcohol and acetone, nothing is owkring, anyone have any thoughts

 

[bill_delong]

soak the part in acetone overnight, it will dissolve the CA glue

 

[F.R.S. Ninja_007]

Do you need to take it out? You could always just have a hard bash session or something

 

[DavidB1126]

Do you need to take it out? You could always just have a hard bash session or something

I don't think you can bash a drift car?
You could try
Unless this is on his other cars.

 

[Chubaka]

Do you need to take it out? You could always just have a hard bash session or something

My first thought.

I don't think you can bash a drift car?

I've seen one cartwheel a good 10 times.

 

[DavidB1126]

I've seen one cartwheel a good 10 times.

Should be able to get the screw out that way

 

[tntpoof]

go buy a bottle of uncure ca.or mildheat..bothhave worked for me.
https://www.bing.com/search?q=ca+gl...6C9A4E788E0A90C6C3FB9277&ghsh=0&ghacc=0&ghpl=

 

[DavidB1126]

Maybe heat? Hair drier heat gun, torch, heat it up and might melt the glue?

 

[Mrgoodwrench35]

Sometimes just 'shocking' the screw with a hammer and punch will get it to come loose

 

[SpeedyBooty]

Seems like a good idea but the screw is the only metal piece in that area so I dont know

Maybe heat? Hair drier heat gun, torch, heat it up and might melt the glue?

 

[F.R.S. Ninja_007]

Perhaps try shrinking the screw with dry ice

 

[Smilinbri]

Maybe stop sniffing it and use Loctite.

(Just playin'.....good luck!)

 

[RustyUs]

If in a pinch to break down CA glue, and got no Acetone around, perhaps fingernail polish remover is in a cupboard somewhere. Yes, I try to make sure I have a jug of Acetone on hand at all times. A little bottle of the stuff by my workbench when gluing tires can save a disaster from happening.

And now, a bit of off topic fun...

Do you need to take it out? You could always just have a hard bash session or something

I don't think you can bash a drift car?
You could try
Unless this is on his other cars.

Peoples have been "bashing'' RCs before "bashing" was a thing. I purposefully got a so called all-road RC to bash with.... mostly street bashing. Some of the most drifting, semi-drifting fun I've had in a long time came from that street bashing RC. I don't used the RC much, as it needs lots of space to open her up. I'm currently looking for a 1/12 scale version to bash in my driveway & lane. Anything is bashable I say.