steering and throttle problems

[aftershock2]

my losi aftershock the throttle and brake wouldnt work so i opened up the reciever box and pull the thorttle connector to check voltage and it was fine plugged it back in and now steering trottle and brakes dont work please help

 

[Metalhead Matt]

Broke wires or bad servo? Do you have another servo you could plug into the receiver?

 

[olds97_lss]

Did you happen to plug them into the receiver backwards? The dark wire goes towards the edge of the receiver, be the "dark" wire brown or black. I think it's brown on JR servos.

 

[aftershock2]

yeah i put the connector in right and i have no broken wires.

i dont have another servor to put in place i just done understand why the steering worked fine and then a second later it didnt

 

[olds97_lss]

Flaky receiver or a bad connection somewhere. Can you wire your battery directly to the receiver and bypass the switch? Will at least rule out those connections.

 

[aftershock2]

i have dont that and still nothing....so does that mean you would call it a reciever

 

[olds97_lss]

Receiver, battery or servos... lol doesn't really rule out much for you.

Do you get a servo twitch or anything when you plug it all in and turn it on? Have you pulled out the crystal and reseated it?

 

[aftershock2]

i have pulled out the crystal and no glitch but i didnt think much of it til now but yesterday i fliped it and lost the antenna tube

also checked battery and it has 6.9 volts so its good