somethings i am getting for my NMT

[nitroking]

_Epic .18 Rotary Carburetor Engine
Trinity Bent Up Gold Body Clips (25)
Aerotrend Blue Line Fuel Tubing Medium 3'
Dubro In-Line Fuel Filter Purple
Motor Saver Super Filter 10mm 45 Degree

and a screw set from Rcscrews.com

i still need to buy some zip-ties, and little washers so i can do the body clip pull mod.(tahnks for the tip skymaxx)

what have yous put on your Nmt?

 

[Kuma]

Sounds good, is there a reason why you want rotary carb? I find it much nier to have a slide carb on an NMT, but using a buggy throttle linkage helps. And also get a T-Maxx tube side exhaust header to get some more bottom end with that Epic. I made a list of items for both MTs in my gallery, have a look. Let me know how that Epic screams with that NMT.

Here's an example of a slide carb setup:

Rotary carb:

 

[nitroking]

i am getting the slide carb...that is the one i the one i copeyd and paste

 

[Kuma]

Great! I'd love to hear your results. BTW, there's tons of sweet tips on the NMT and I bookmarked it, might as well share it:

http://www.kedar.itgo.com/tipz.html#.21

I like the buggy wing idea, I might try and fit on my spare Ofna wing for looks.

 

[nitroking]

hey oin the slide carb setup do u use a servo saver or no?

 

[Kuma]

hey oin the slide carb setup do u use a servo saver or no?

No, you see the spring on the throttle linkage, that acts as a servo saver all by itself.

Here's what my NMT looks like with a wing on, looks pretty slick and fits just right with little mod. I have an unpainted RC10GT that'll replace that ugly body.

 

[nitroking]

hot poop i might do that whn i get some more money i just spent it all on those parts i popsted and a screw set from rcscrewz.com

 

[Razor]

i have a .21 on my nmt just like kedar.... does anyone know what happened to him... he just disappeared one day.... anyways, I've had the buggy wing since madman i think did it, then kedar... then some dude, then me. man that was a LONG time ago but it is one of the best things I've ever done. makes the truck VERY stable at speed. .21nmt is the ONLY way to go.

 

[newnitrofan]

I think Kedar fell off the face of the planet man. Dude you should save your money on the set of screws from RC SCrewz I have had to take a dremel to more of those stupid things because of stripped heads than is worth the $18.00 I paid for it. You should also look into some RTR 3 bevel gears for the differentials since that is a pretty powerful engine. I know razor has some great pics of his diffs after he but his 21 in it. Later

 

[nitroking]

WELL TRO LATE

 

[newnitrofan]

Newayz here's link to the bevel gears. It's a much worth while upgrade for the money it costs. I think the cost is like$7.00.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXBTA4&P=0

 

[nitroking]

well i might re tghink it cause this two snow storm i made $195
and $60 of that goes to my site hosting so i got $137 left so i might get the .21 but i still need a screw kit do u know where i can get one?

 

[newnitrofan]

Nitroking I can not attest to any other screw company's out there did a search though and found that www.hexscrews.com has one. I dunno I am not trying to discourage you but IT's kind of a pain when you use a screw in the diff and get it all tightened and try to undo it and it strips right where it's at. Hard to dremel that out ya know.

 

[nitroking]

OK I MIGHT GET THE screw kit then

 

[nitroking]

scratch everything i am getting but the screw kit i am getting a new truck

 

[Kuma]

Originally posted by Razor
i have a .21 on my nmt just like kedar.... does anyone know what happened to him... he just disappeared one day.... anyways, I've had the buggy wing since madman i think did it, then kedar... then some dude, then me. man that was a LONG time ago but it is one of the best things I've ever done. makes the truck VERY stable at speed. .21nmt is the ONLY way to go.

Any advie on a .21 conversion? I just picked up two RB .21 engines that I might use one for, did you stick with the stock chassis or go with a NE or Powerline chassis? I guess I'll have to get stronger bevel gears.

The wing does indeed stabalize during acceleration.

 

[Razor]

well, i just bough the wolfpack conversion, and the ae prop nut (less than 1 dollar ) so that i didn have to shave my niro racing clutch (good invesmen to do btw) and i slapped i on my truck, stock diffs and all (they were sealed / 5k wt oil) , best seup ever for my nmt.:sheep: < new icon?

 

[Kuma]

Hmm the Wolfgang conversion kit that I have seen ar expensive ($250+), for some reason New Era only sells a flywheel and engine mounts which supposadly fits on the stock chassis.

 

[Razor]

uh no, www.brucknerhobbies.com click, products, then click wolfpack racing (is in the paragraph with a bunch of links) and then click For hpi, and scroll way down and ull see a big block conversion kit for 60 bucks. it has everything you need. minus he engine / clutch.

 

[newnitrofan]

Dude I would full on buy from wolfgang any day of the week over new era. If you email him you can paypal him the funds and he will send you some the parts. He saw that I was having a poopy time with my 21 conversion with the mounts I got from him. The engine was apparently an oddball 21 and wouldn't fit his mounts and he full on offered to make me some custom mounts for free. He is a totally stand up guy and I would buy from him rather than new era any day. He has a quality product to boot.