somethings i am getting for my NMT

[Razor]

yes, alhough since english isn his 1st language it gets odd sometimes.

 

[newnitrofan]

Razor I bought my mounts used off of a guy for $30.00 which he didn't know. He offered to make them from scratch for free. The hold patterns were off and the mounts also were not tall enough. He happened acrossed my blubbering about my bad news of a bogus 21 project on radiocontrolzone and took it upon himself to email me and take it up with me personally. He didn't have to do it at all. But I agree I've exchanged a couple of email's that read weird.

 

[Razor]

yea he has gold engine mounts for the odd .21's,see, only use them on oversize engines with the pullstarter taken off and using a starterbox. if not, the engine tabs might break off. the engine i used was an oversize, the ofna hyper .21, and i took a file, and shaved the bottom of the engine and the text on the side underneath the tabs. (you only have to do that if ur using non-pull and using a starter box.) and this smiley is cool >>>>>> :madface:

 

[newnitrofan]

Have to say I have seen a lot of new smilies lately where did they all come from???:duff: Duff beer that rules

 

[Kuma]

:whip: Kind of amusing smileys.

I'll look into the Wolfgang kit, also on Keder's NMT tip page he shows that he made spacers to raise the engine mount for the Hyper 21.

 

[Razor]

ah yes, when u place ur order for the wolfpack ki, email wolfgang and ask him for the "riser plaes for .21 kit" and hell send them to you for free. hey arent really required as while waiting for them i used a set of old o.s. engine risers underneah my .21 mounts. looks funny, but works.

 

[Kuma]

I looked around on Bruckner, they don't seem to ship to Canada, and I found Wolfpack Radicals website and noplace to order or no email address. I'm not having much luck so far.

 

[newnitrofan]

Kuma it's [email protected] email him he should be able to take care of you even if you are in canada. He's an awesome guy. Just make a list of what you want and he should email you back with how much everything is as well as how much shipping will be. Also go to his homepage and there is a link at the bottom of the page that says questions, there is also another one that says sales. He should take care of you no problems.

 

[Kuma]

Just got a kit off Wolfgang with the risers I asked for, and you're right, his emails do read funny. Thanks guys!

 

[Kuma]

Say, Newnitrofan or Razor, what's your gearing on the .21 MT, I'm thinking of trying 15/52 but the tires are small and might be too low? I also have a 48 tooth spur gear.

 

[Razor]

i sued the prolione masher 2k's (2.2 not tmaxx size) and i used 15/49 gearing, any higher (ie: 13/51 or 12/52) and ull bust differentials all day long. i used the stock differentials with 5k wt oil (sealed, look on www.kedar.itgo.com ) and they lasted quite a while for diffs that lasted 2 other engines and about 1 year of running solid everyday almost (cept rain... even though I've ran in the rain before)

anyways, i say use 15/49 , i was still able to wheelie when i really got on the throttle and it was REALLY fast and still provided PLENTY of low end, i mean, huge roosts and stuff



oh btw : this new smiley r g0d omfg!!!!!!11

 

[Kuma]

I'm already looking for Masher 2K tires, I've been wanting bigger tires to make it more like a monster truck than a stadium truck. I had that diff issue in mind, which is why I didn't want to end up gearing it wrong, I have a 52t steel, I'd have to wait if I get a 49t steel gear. I'll go with 15/52 for now then.

 

[Razor]

yea i used that and 49 when i busted my 52 on accident.

oh, one BIG word of advice.

goto www.towerhobbies.com

and search for an "ae prop nut" its like $1.90 and also get the "ofna clutch kit" its got two VERY necessary parts in it, the ae nut is so you donth ave to shave the INSIDE of ur nitro racing clutch and the second part has these metal tubes that go into the front of your clutchbell and extend the shaft so it will work. VERY important. if you have any trouble with that contact me @ [email protected]

anyways, .21nmt is the next best thing besides my buggy. w00t.

had to get this in

 

[Kuma]

Yeah no probs on the OFNA parts, I already got the Ofna flywheel, clutch, clutchnut for both SG and threaded from a spare motor I had for an MBX.

 

[Razor]

yea but if u use the actual .21 sg nut, then u WILL have to shave out the center of your hpi nitro race clutch. I'm not too sure wether any flywheel other than the wolfpack one will work... but give it a try i guess.. uh oh.. uh oh...


ahaha deadhorse is the best.

 

[Kuma]

Yay, got the Wolfgang .21 kit on its way, also new Clawz rims and Masher 2000 tires. This is going to be one sweet ride, I also have an unpainted RC10GT body and might pick up a new 1/8 buggy wing (the one I have on there now is old and a bit cracked). The RB 5-port engine has a black S7 head on it, and I still want to find a bigger fuel tank- if you come across one that'll possibly fit let me know. :llama: :hump:

 

[Kuma]

I forgot about some pics I came across, might be a little inspiring for some ideas, though this truck lacks serious chassis bracing (think of the flex that thing will have).

 

[Kuma]

And the other side