KingD
RC Newbie
- Messages
- 7
- Reaction score
- 0
Hi guys, new to the forum here, and this is my first nitro rc car. Its been sitting at my parents house for a few years and its pretty much brand new (i think i turned it on once years ago) but i remember something was not right. I recently took it home with me and tried to turn it on again. I am not sure if something is wrong with the servo or the transmitter/reciever.
There are a few things happening:
1. Sometimes when i power the rc car and the controller on, ONLY the throttle starts freaking out. Starts moving on its own.
2. When i turn the wheel of the car, the throttle responds.
3. I switched the throttle and the steering channels on the receiver and the opposite happened, throttle is fine and the steering is finicky. This leads me to believe that the servos are fine, and that it may be a issue with the controller/reciever.
What do you guys think?
There are a few things happening:
1. Sometimes when i power the rc car and the controller on, ONLY the throttle starts freaking out. Starts moving on its own.
2. When i turn the wheel of the car, the throttle responds.
3. I switched the throttle and the steering channels on the receiver and the opposite happened, throttle is fine and the steering is finicky. This leads me to believe that the servos are fine, and that it may be a issue with the controller/reciever.
What do you guys think?